Honda CR-V 2022 Owner's Manual page 89

Indicator Name
Low Oil Pressure
Indicator
Malfunction
Indicator Lamp
Charging System
Indicator
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
On/Blinking
● Comes on when you turn the
ignition switch to ON *1 , and
( w
goes off when the engine starts.
Comes on when the engine oil
●
pressure is low.
Comes on when you turn the
●
ignition switch to ON ( w *1 , and
goes off when the engine starts, or
after several seconds if the engine
did not start. If "readiness codes"
have not been set, it blinks five
times before it goes off.
Comes on if there is a problem
●
with the emissions control system.
Blinks when a misfire in the
●
engine's cylinders is detected.
Comes on when you turn the
●
ignition switch to ON ( w *1 , and
goes off when the engine starts.
● Comes on when the battery is not
charging.
Explanation
● Comes on while driving - Immediately
stop in a safe place.
2 If the Low Oil Pressure Indicator
Comes On P. 633
Readiness codes are part of the on board
●
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 653
Comes on while driving - Have your
●
vehicle checked by a dealer.
Blinks while driving - Stop in a safe
●
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take your vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 634
Comes on while driving - Turn off the
●
climate control system and rear defogger
in order to reduce electricity
consumption.
2 If the Charging System Indicator
Comes On P. 633
uuIndicatorsu
Message
Continued 87