Brushing Modes - Remington SONICFRESH SFT-150 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH
, BRUSHING:
1
Run the brush head under water to wet the bristles and
add toothpaste.
2
Hold the brush so the bristles are touching the teeth at a
slight angle (facing towards the gum line) Fig.1.
3
Press the on/off switch to turn on the toothbrush.
4
Apply light pressure and brush the teeth in back and forth
motions.
, TIMER & INTERVAL PACER
5
The recommended brushing time is 2 minutes, twice a day.
6
To help ensure you brush for the recommended time, the toothbrush has a
2 minute timer.
7
The brush will switch off after 2 minutes to indicate the end of the
brushing time.
8
To ensure thorough cleaning, clean the teeth a section at a time.
9
We recommend 4 sections.
10 The interval timer will pulse every 30 seconds to indicate when to move to
the next section.
11
Repeat until all 4 sections have been cleaned.
, NOTE: If you change cleaning mode during brushing, the timer will set
back to zero and the 2 minute timer will start again.

, BRUSHING MODES

The toothbrush has 3 brushing modes:
1
Clean: Daily clean (2 minutes)
2
Sensitive: For sensitive teeth and gums (2 minutes)
3
Massage: To gently stimulate and massage the gums (2 minutes)
To select the brushing mode, press the Mode button. The green LED light
indicates the selected mode.
, REPLACING THE BRUSH HEAD
For best results, we recommend replacing the brush head approximately
every 3 months.
Fig. A
Fig. B
Fig. 1
5

Advertisement

Table of Contents
loading

Table of Contents