LG 22LH2 Series Owner's Manual page 43

Hide thumbs Also See for 22LH2 Series:
Table of Contents

Advertisement

!
NOTE
Avoid keeping a fixed image on the TV 's screen
G G
for prolonged periods of time.The fixed image
may become permanently imprinted on the
screen;use a screen saver when possible.
There may be interference relating to resolution,
G G
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolu-
tion or change the refresh rate to another rate
or adjust the brightness and contrast on the
menu until the picture is clear. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult the man-
ufacturer of the PC graphic card.
The synchronization input waveform for
G G
Horizontal and Vertical frequencies are separate.
If the resolution of PC is over SXGA, there will
G G
be no picture on the TV.(only HD Models)
All manuals and user guides at all-guides.com
G G
G G
G G
G G
G G
Connect the audio cable from the PC to the
Audio input on the TV.(Audio cables are not
included with the TV).
If you use too long an RGB-PC cable, there may
be interference on the screen. We recommend
using under 5m of the cable. This provides the
best picture quality.
We recommend using 1920x1080, 60Hz (Only
19LU5***, 19/22/26/32/37/42LH2***:
1360x768, 60Hz) for the PC mode, these
should provide the best picture quality.
HDMI mode supports PCM audio format only.
If the Audio setting is set to
Dolby/DTS/Bitstream in some DVDP/STB, make
sure to change the setting to PCM.
41

Advertisement

Table of Contents
loading

Table of Contents