Battery - GMC Yukon Denali 2010 Manual

Properly torqued wheel nuts are necessary to help
prevent brake pulsation. When tires are rotated, inspect
brake pads for wear and evenly tighten wheel nuts in
the proper sequence to torque specifications in
Capacities and Specifications in the owner manual.
Brake linings should always be replaced as complete
axle sets.
Brake Pedal Travel
See your dealer/retailer if the brake pedal does not
return to normal height, or if there is a rapid increase in
pedal travel. This could be a sign that brake service
might be required.
Brake Adjustment
Every time the brakes are applied, the disc brakes
adjust for wear.
Replacing Brake System Parts
The braking system on a vehicle is complex. Its many
parts have to be of top quality and work well together if
the vehicle is to have really good braking. The vehicle
was designed and tested with top-quality brake parts.
6-16
When parts of the braking system are replaced
example, when the brake linings wear down and new
ones are installed be sure to get new approved
replacement parts. If this is not done, the brakes might
not work properly. For example, if someone puts in
brake linings that are wrong for the vehicle, the balance
between the front and rear brakes can change
worse. The braking performance expected can change
in many other ways if the wrong replacement brake
parts are installed.

Battery

This vehicle has a standard 12 volt battery and a
high voltage hybrid battery.
Refer to the replacement number on the original battery
label when a new standard 12 volt battery is needed.
for
for the