Samsung DVE45T3400P User Manual page 38

Operations
04 Time
05 Digital Graphic
Display
06 Adjust Time
07 Wrinkle Prevent
08 Smart Care
09 POWER
10 START/PAUSE
NOTE
Extremely tangled items finished by the washer may degrade the drying efficiency or
cause the door to open. We recommend that you untangle the items before drying.
38 English
DC68-03784M-04_IB_DV3400T_EN_R.indd 38 DC68-03784M-04_IB_DV3400T_EN_R.indd 38
Press to adjust the drying time for the Manual Dry cycles. This
is not available with the Sensor Dry cycles because the dryer
determines the drying time by sensing the current moisture level
of the load.
* Damp Alert
This alert is available for all sensor dry cycles except for ACTIVE
WEAR and SANITIZE. Available dry levels are Less, Normal, More,
and Extra.
If a load contains mixed fabrics, the Damp Alert indicator blinks
when average dryness of the items in the load is 80 % dry. This
lets you take items that you don't want fully dried or that dry
quickly out of the dryer early while letting others continue to dry.
Displays all cycle information, including the cycle time,
information code, and operating status.
You can change the set time in the Manual Dry cycles (TIME DRY,
QUICK DRY, AIR FLUFF and WRINKLE RELEASE). To change the
cycle time, press or
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry, and can be removed at any time during the
Wrinkle Prevent cycle.
After connecting the Tumble Dryer to your home network using
the SmartThings app, you can control or monitor the dryer
remotely. When started, the Smart Care indicator blinks. The dryer
enters waiting mode and waits for remote commands.
Press to turn on/turn off the dryer.
Press to start or stop operation.
until the desired time is displayed.
2023-06-29 2023-06-29 4:51:26 4:51:26