Installation Instructions - Thermador EXTNCB25W Installation Instructions Manual

Installation instructions

Before you begin
Parts included
• 25 ft. extension cable
IMPORTANT: Cutting off a connector to the appliance or
to the extension cable kit will void the warranty.
Compatible blowers
The blower extension cable is compatible with the
following in-line and remote blowers:
Blower
Remote blower 1000 CFM
Remote blower 600 CFM
Remote blower 1300 CFM
In-line blower 600 CFM
In-line blower 1000 CFM
Compatible hoods
The 25 ft. extension cable can be used on the following
ventilation models only. The EXTNCB25W is designed for
use with Thermador Professional Series products without
any additional wiring. If the cable is to be used with other
products, please use the optional adapter kit EXTNSET4
to make the additional connections.
Description
Thermador Professional Series
Chimney Wall Hood
Thermador Professional Series
Harmony Wall Hood
Thermador Professional Series Grand
Wall Hood
Thermador Professional Series
Custom Insert
Thermador Professional Series Island
Hood
Page. 5
Extension cable installation
To connect the extension cable to the hood
1. Route the hood's internal blower harness through the
Model
VTR1030W
VTN630W
2. Secure with a 3/4'' (19 mm) strain relief.
VTR1330W
3. Connect the 25 ft. extension cable to the blower
VTI610W
VTI1010W
1
2
Model
HPCNxxWS
PHxxHWS
PHxxGWS
VCINxxGWS
HPINxxWS
knockout hole.
harness outside the hood.
1
Connects to the hood
Connects to a remote or in-line blower
2