Specifications; Informations - Rami PMI 304 User Manual

SPECIFICATIONS

Inputs Connector
3 pts Fem XLR
Micro
Line
3 pts Fem XLR
Outputs Connector
Micro Sub-D 9 Fem
Mix 3 pts male XLR
Distorsion > 0,025 % :
Bandwidth : 12 Hz to 33 kHz at -1 dB.
Noise to the input :
micro input : - 133 dBu
Phantom power supply : 48 Volts
Power supply :
Size :
Weight :

INFORMATIONS

Warning !!!
PMI 304 mains connector has three wires (2 poles + earth). Earth should imperatively be
connected to mains earth.
Never use this equipement without proper grounding.
Check quality of grounding.
Should noise or hum occurs when connected to other equipments, never disconnect
grounding, use insulating transformer on mains.
Never open the case without disconnecting mains
Avoid high temperature exposure.
Never expose the equipment to rain, snow or moisture.
PMI 304 complies with :
EN60065, EN55013, EN55020, EN60555-2, et EN60555-3, according to 73/23/EEC,
89/336/EEC and 93/68/EEC.
ENGLISH
Type Impedance
200 Ohms
Balanced
Balanced
10 KOhms
Type Impedance
Balanced
470 Ohms
Balanced
100 Ohms
for input level to 40 dBu and output level to +6 dBu.
0
with a
- 129 dBu with a 220
230 Volts +/- 10 %
220 x 44 x 150 mm
1,5 kg
Sensitivity
-58 dBu / 0,97 mV
matched to -26 dBu / 39 mV
-24 dBu / 49 mV
to +7 dBu / 1,73 V
Nominal level
+6 dBu / 1,54 V
+6 dBu / 1,54 V
charge.
charge.
50/60 Hz
14
Clipping
-5 dBu / 435 mV for
-26 dBu sensitivity
+27 dBu / 17,3 V for
17 dBu sensitivity
Maximum level
+26 dBu / 15,4 V
+26 dBu / 15,4 V
Rami - PMI 304