AES global MON-11 Manual

MON-11 v8.1
* ALWAYS TEST THE UNIT ON SITE
Step 1
Step 5
Connect the tablet to
the local WiFi
Detailed Instructions
can be found in the
full manual available
on our website.
Box Contents
1 x 2m LAN Cable
1 x Micro USB
OTG Cable
1 x Wall bracket
1 x DC Power Adapter
4 x Screws
1 x Android
(12v 2A)*
4 x Wall Screws
*Non-UK units will have an adapter
Monitor
4 x Wall Plugs
- Android Monitor
BEFORE INSTALLATION TO AVOID RESTOCKING FEES *
2. Use the screws
provided to attach
the monitor
bracket to the
monitor.
Step 4
Power the tablet on with
the DC power adapter
provided
Full Manual Available Here!
Please scan this QR Code to
go to our Resources page
where you can find all of our
1 x Quick
Start Guide
guides and available
1 x Cover
resources.
2 x Screws
included
Step 2
Step 3
Important Notices
Since the tablet software updates regularly, the user manual may not cover all aspects
of new features.
Copyright Information
All intellectual property rights in this publication are owned by and protected by
applicable copyright laws and international treaty provisions. No part of this publication
may be reproduced in any form whatsoever or used to make any derivative work
without prior written approval by AES Global Ltd.
AES Global Ltd reserves the right to revise this publication, and/or make improvements
or changes in the product(s) and/or the program(s) described in this documentation at
any time without prior notice. The information in this document is provided in good
faith, but without any representation or warranty whatsoever, whether it is accurate, or
complete or otherwise, and on express understanding that shall have no liability
whatsoever to other parties in any way arising from or relating to the information or its
use.
All other trademarks are the property of their respective owners. Other company and
brand products and service names are trademarks or registered trademarks of their
respective holders.
1. Do not push objects into holes and ventilation slots.
2. Do not expose this product to moisture or place any objects filed with liquids on
or near the product.
3. Do not place a naked flame source, such as lighted candles, on or near this
product.
4. Do not store or operate the device in environments where the temperature is
above 50 degrees Celsius or below -10 degrees Celsius.
5. Do not intentionally hit the device or place heavy or sharp objects on the
device.
6. Only use accessories specified by the manufacturer.
7. Keep the device away from benzene, diluents, and other chemicals.
8. Do not attempt to repair this product yourself. Always use a qualified service
agent to perform adjustments or repairs.
9. While using earphones, if the volume is excessively high it may cause hearing
damage. Please adjust the volume to a safe level and moderate use.
10. Do not disconnect the tablet suddenly when formatting, uploading, or
downloading.
11. The tablet is not moisture and water resistant.
12. Please do not use it in a damp environment.
13. Do not upgrade the firmware by yourself. The tablet should be upgraded with
the right firmware and right methods offered by us. If an upgrade is needed,
please contact us.
This device complies with CE and FCC regulations.
Wall Mounting