Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23b
58116
Advertisement
Table of Contents
Related Manuals for HAUL MASTER 58116
Summary of Contents for HAUL MASTER 58116
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com 58116 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.
-
Page 2: Specifications
Keep children away. Children must Sudden load movement may not be allowed in the work area. briefly create excess load causing product failure. 10. Do not exceed weight capacity of tailgate. For technical questions, please call 1-888-866-5797. Page 2 ITEM 58116... - Page 3 It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS. For technical questions, please call 1-888-866-5797. ITEM 58116 Page 3...
- Page 4 Before loading or unloading turn vehicle’s engine off, set its transmission in gear or park, engage its emergency brake and block its wheels. Make sure the Ramps are clean and dry before loading or unloading. For technical questions, please call 1-888-866-5797. Page 4 ITEM 58116...
- Page 5 After Safety Strap adjustment, the entire Lip portion of the Ramps must fit securely onto the tailgate and not be able to slide backwards. If either Ramp can still slide, adjust both Safety Straps. For technical questions, please call 1-888-866-5797. ITEM 58116 Page 5...
- Page 6 Set up the Ramps on the truck bed as explained under operation. Remove all tie down straps and securing equipment from the ATV. WARNING! TO PREVENT SERIOUS INJURY: Be sure the 4-wheel ATV is centered on Ramps. For technical questions, please call 1-888-866-5797. Page 6 ITEM 58116...
- Page 7 Remove the tie-down straps (not the bike onto the Ramp. Someone included) from the 2-wheel bike. must always hold the hand brake. Slowly work the bike down the Ramp and onto the ground. For technical questions, please call 1-888-866-5797. ITEM 58116 Page 7...
-
Page 8: Maintenance And Servicing
Ramps. • loose hardware • misalignment or binding of parts • cracked or broken parts • any other condition that may affect its safe operation. For technical questions, please call 1-888-866-5797. Page 8 ITEM 58116... -
Page 9: Please Read The Following Carefully
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175432544 when ordering parts. For technical questions, please call 1-888-866-5797. ITEM 58116 Page 9... -
Page 10: Parts List And Diagram
Parts List and Diagram Parts List Part Description Qty. Part Description Qty. Ramp Washer, #6 Extra Large Safety Strap Hex Socket Button Head Bolt, M6 x 16 Lock Nut, M6 For technical questions, please call 1-888-866-5797. Page 10 ITEM 58116... - Page 11 Diagram Bottom View Top View For technical questions, please call 1-888-866-5797. ITEM 58116 Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 58116 and is the answer not in the manual?
Questions and answers