Summary of Contents for Mr Beam AF2
- Page 1 MANUAL Air Filter System Translation of the original German manual © 2023 Mr Beam Lasers GmbH | München, 03. July 2023 | Revision 2.0...
-
Page 2: Table Of Contents
1.2 About Mr Beam Air Filter System OVERVIEW OF COMPONENTS 2.1 Scope of supply of Air Filter System (Third party devices) 2.1 Scope of supply of Air Filter System (Mr Beam) 2.3 Overview of Air Filter System 2.4 Connections SAFETY AND CONFORMITY 3.1 Intended use... -
Page 3: Using The Manual
1.2 About Mr Beam Air Filter System Caution: Before the initial To facilitate understanding of the operating The Mr Beam Air Filter System (from now start-up and use of the Mr Beam instructions, the following symbols are on only referred to as Air Filter System) -
Page 4: Overview Of Components
OVERVIEW OF COMPONENTS In the following section, you will get an overview of the various components and connections of your Mr Beam Air Filter System. Mr Beam Air Filter Controller Cable Mr Beam Air Filter System, power (hereinafter referred to only as controller) -
Page 5: Scope Of Supply Of Air Filter System (Mr Beam)
Exhaust air hose with 1x 50 mm suction nozzle Mr Beam Air Filter System: Connection exhaust air hose Cover Locking screws 2 screws, 2 washers and Cable Mr Beam Air Filter System Mr Beam suction nozzle Safety sign Connections Page 8 | 02: Overview of Components... -
Page 6: Connections
2.4 Connections Micro USB port (For maintenance purposes only) Analog connection (old control) Page 10 | 02: Overview of Components 02: Overview of Components | Page 11... -
Page 7: Safety And Conformity
Mr Beam Lasers GmbH, hazards of the Air Filter System and who excludes any liability of Mr Beam Lasers have received appropriate training. GmbH in any case. Note: The warranty does not cover Please note that this chapter is particularly important. -
Page 8: Safety Instructions
Air not been approved by Mr Beam Lasers Filter System is prohibited. Failure to do GmbH is not permitted and can lead to so may result in serious injury. -
Page 9: Warning And Safety Signs
The product fulfill the relevant European harmonisation legislations: warning and information signs can be Rechtsvorschrift / Legislation: Titel / Title: ordered from Mr Beam Support (mr-beam. 2006/42/EC Maschinenrichtlinie / Machinery Directive (ABl. L 157, 9.6.2006, p. 24–86) org/ticket) or reproduced independently 2014/30/EU EMV Richtlinie / EMC Directive (ABl. -
Page 10: Unpacking
4.1 Unpacking Open box Place the box on a flat surface. Open the box [1]. Do not use any sharp objects that could damage the surface. Pull out the upper transport protection [2]. Remove from box Take the Air Filter System out of the box [1]. -
Page 11: Connect To Third Party Devices
[7]. The equipped with a left-hand thread. exhaust air hose is equipped with a left-hand thread. Connect Air Filter Syste Connect to the Mr Beam laser cutter Connect the controller to the Mount the suction nozzle on your designated connection of the Air Filter Mr Beam laser cutter. -
Page 12: Control The Air Filter System
5.1 Controller operation Recognition of the system If you have connected the controller correctly to the Air Filter Systems, you will see the Mr Beam Air Filter 2 on the display [12]. Connect ... Air Filter 2 Operate rotary button... - Page 13 5.1 Controller operation Show filter consumption The „Filter consumption“ page shows you the percentage filter consumption of the pre-filter and main filter. It also shows the runtime since the last filter change took place. Note: The percentage display of the filter consumption is only a guide value.
-
Page 14: Servicing And Maintenance
6.1 Cleaning and repair Cleaning Repair Repair of the Air Filter System by the user Note: No tools are required for is not intended. To ensure that your Air regular cleaning, nor do any parts Filter System is quickly ready for use again need to be unscrewed. -
Page 15: Changing The Filters
Regularly check the condition of your main filter are available at face up. filters. Change the pre-filter mat when it Mr Beam Online Shop: has lost its pink color. Change the main www.mr-beam.org/af2filter filter when the fins under the grid show a... -
Page 16: Additional Information
7.1 Technical data Dimensions Air Filter System (ca.) Width/Depth/Height 270 x 270 x 270 mm Weight 5,6 kg Sound level maximum 56 dB (A) Air Filter Controller Width/depth/height (with button) 77 x 56 x 32 mm Weight 59 g Display size 1,28“... -
Page 17: Storage & Transport / Support
Air disassembly or dismantling of the unit is Filter System in this case. required, please contact Mr Beam Lasers GmbH. As described in Section 3 Safety » If your Air Filter System will be unused... -
Page 18: General Terms And Conditions
8.1 General Terms and conditions The latest applicable general terms and conditions, as well as the warranty conditions of Mr Beam Lasers GmbH, can be found at: www.mr-beam.org/policies/terms-of-service 8.2 Contact adresses Address Mr Beam Lasers GmbH Gollierstr. 70 80339 Munich... - Page 19 Twitter or Facebook, with inspiration from other members of the Mr Beam community. Naturally, we would also be happy if you share your works there and tell your friends about it. We are curious to see how you use your Mr Beam and what you will create with it!
Need help?
Do you have a question about the AF2 and is the answer not in the manual?
Questions and answers