Summary of Contents for Jegs 555-81449
- Page 1 Mobile Tool Chest Assembly Guide 555-81449 Black Powder Coated | 15-Drawer | 72 in.
-
Page 2: Parts List
Parts List DESCRIPTION DESCRIPTION DESCRIPTION Cabinet Top Drawer (Large 1/2) Drawer (Medium) Handle Drawer (X-Large 1/2) Drawer (Large) Bolt ( in. x in.) Drawer Sliders Drawer (X-Large) Power Strip Caster (Locking Swivel) Drawer Liner (Narrow) Power Cord Bolts ( in x 1 in.) Drawer Liner (Wide) Drawer (Medium 1/2) Lock &... - Page 3 Safety We would like to take this opportunity to thank you • Locate in a suitable work area. for purchasing this JEGS Mobile Black Powder Coated 15-drawer Tool Chest. We welcome any • Monitor children near the cabinet. comments or feedback you might have. If you have any questions about this product or about •...
-
Page 4: Installation
Installation HANDLE (Fig.01) Figure 02 1. Attach with in. x in. bolts, lock washer and flat washers. Figure 01 DRAWERS (Fig.03) 1. New drawer slides may be stiff and difficult to open at first. A gentle outward pull should release the safety that prevents the drawer CASTERS (Fig.02) from opening whilst the cabinet is being moved. -
Page 5: Maintenance
Maintenance 1. To clean use a soft cloth that will not scratch Figure 04 the surface. 2. DO NOT use solvents of any kind they may Socket damage the surface. Power Cord 3. Liquid spills should be removed immediately, with Plug use a soft clean cloth to blot the spill gently - avoid rubbing. - Page 6 Electronics This power strip is equipped with a power cord WARNING that has an equipment-grounding wire and a grounding plug. Only insert plug into a matching receptacle (outlet) that is properly installed and • Do not connect to plug receptacle via grounded in accordance with all local codes and extension cords or in series with other ordinances.
- Page 7 Anti-Ti pp ing It is strongly recommended that you anchor this IMPORTANT tool chest to prevent it from tipping over. Toppling furniture can cause serious injury or death. • Check for wiring or plumbing inside the wall before drilling. An anti-tipping kit has been provided to prevent your tool chest from tipping forward.