Glasdon MANCHESTER BOLLARD Installation Instructions

Download this manual

GLASDON MANCHESTER BOLLARD INSTALLATION INSTRUCTIONS

Ensure that personnel carrying out this installation have the relevant qualifications/certificates.

Ensure that all relevant personnel read the points listed within this leaflet and that a copy is given to

staff involved with the installation and maintenance of this product.

Please refer to 'The Manual Handling Operations Regulations 1992'.

Glasdon recommends that a full Health and Safety analysis is carried out prior to installation.

MANCHESTER BOLLARD-

EXTENDED BASE MODEL

KIT CONTENTS

- Bollard

- Lock Cover Cap

- Key

- Anchor Pin

MANCHESTER BOLLARD C/W

LOCKFAST SOCKET

KIT CONTENTS

- Bollard

- Lock Cover Cap

- Key

- Anchor Pin

- Lockfast Socket

EQUIPMENT REQUIRED

-Spade

-Tape Measure

-Spirit Level

-Concrete Mix (we suggest using a quick setting

concrete i.e. QC10 for all installations)

-Safety Equipment (hard hat, mask, goggles,

re ective clothing, etc)

OPTIONAL INSTALLATION/

BLANKING PLATE

See Page 3 for

Instructions

Please note that diagrams are not to scale

Need help?

Do you have a question about the MANCHESTER BOLLARD and is the answer not in the manual?

Page 1 Ensure that all relevant personnel read the points listed within this leaflet and that a copy is given to staff involved with the installation and maintenance of this product. Please refer to ‘The Manual Handling Operations Regulations 1992’. Glasdon recommends that a full Health and Safety analysis is carried out prior to installation. MANCHESTER BOLLARD- EXTENDED BASE MODEL...
Page 2 Installation Instructions for Glasdon Manchester™ Bollard & Lockfast™ Socket Diagram B Diagram C Diagram A Using the other end of the key insert To remove the Lock Cover Cap from Unscew the Lock Cover Cap by turning the bollard insert one end of the key into the key track and twist bollard the key anticlockwise.
Page 3 Insert and Remove Optional Blanking/Installation Plates We recommend using the Temporary Plate during We recommend using the Locking Plate at all times when the installation to prevent concrete entering the socket or for a bollard is not in the socket so as not to create a safety hazard. short duration Position the Position the...
Page 4 SAFETY NOTE: PLEASE REFER TO ‘THE MANUAL HANDLING OPERATIONS REGULATIONS 1992’ DURING HANDLING. , GLASDON MANCHESTER BOLLARD AND LOCKFAST SOCKET ARE TRADEMARKS OR REGISTERED TRADEMARKS OF GLASDON GROUP OR ITS SUBSIDIARIES IN THE U.K AND OTHER COUNTRIES • A planned maintenance schedule or regular inspection is recommended, replacing Glasdon U.K Limited components as necessary.