Austere 5S-BNN-2P Series User Manual

Banana Adapters & Speaker Cable \\ User Guide/Owner's Manual
Model numbers:
Banana Adapters \\ 5S-BNNxx-2P
Speaker Cable \\ 5S-12SPxx-100, 5S-14SPxx-100, 3S-12SPxx-50, 3S-14SPxx-50
CAUTION Turn the power off on audio equipment before installing banana adapters
or Speaker cable to eliminate the risk of damage. Use the banana adapters and speaker
cables indoors and in cool dry locations. DO NOT install near any heat-emitting
appliances such as radiators or heat registers. DO NOT install where excessive
moisture is present.
Austere's Speaker Cables feature fine-stranded ultra-pure copper that's been bundled to
accurately transfer the full range of audio frequencies to your speaker for a lifelike sound.
Additionally, the cable is wrapped with our signature SoftTouch, high-flex, durable jacket for
smooth wire routing along baseboards and around corners.
Austere's Banana Adapters have gold-plated connectors to reduce the chance of oxidation and
keep sound quality at its maximum. Additionally, the connectors have been designed with
SecureLatch to ensure a strong, consistent connection, preserving signal integrity.
Product Registration
Prior to using your product, please go to
and to access our complete limited lifetime guarantee statement.
INSTALLATION

Routing the Speaker Cable

Follow these steps to route the speaker cable effectively:
1. Separate the blue Precision Pull Marker from the cables by approximately two inches.
2. Use the blue Precision Pull Marker to guide and pull the cable through walls and cabinets.
This method reduces stress on the speaker cable and prevents potential damage that may
go unnoticed.
www.austere.com/guarantee to register your product