Description Of The Appliance - Jocel JLR014085 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

DESCRIPTION OF THE APPLIANCE

A---WASH CYCLE SELECTOR knob: Used
to set the desired wash cycle (see "Table of
wash cycles").
• OFF position
selector knob to switch the machine off
while the light under the symbol "
If the machine is switched off during a wash
cycle, this wash cycle will be cancelled.
B---TEMP.
button: Press to change the
water temperature for the current cycle, with
the changed temperature value appears on
digital display.
C---SPEED
button: Press to change the
spinning speed for the current cycle, with the
changed spinning speed value appears on
digital display.
• CHILD LOCK function
is running, if you want to activate the
control panel lock, please press and hold
the
button for approximately 3 seconds.
For a detailed description, see→ Various
cycles and functions.
• Cancelling the buzzer:
Press and hold the
TOUCH button together at the same time
for at least 3 seconds, you can turn off the
buzzer that sounds during the washing
cycle running.
For a detailed description, see→ Various
cycles and functions.
D---STEAM
button: Press to add a steam
washing process after the last drain stage of
the selected (or run) program.
Some wash cycles cannot select the steam
washing function. The steam washing function
: Turn the wash cycle
" is lit.
: When the cycle
button and ONE
can be selected if there is a steam washing
coin
in front of the program name on the
control panel or
in the wash cycles table.
For a detailed description, see→ Various
cycles and functions.
E---RINSE
change the rinse count for the current
cycle, the changed rinse count appears on
digital display.
F---DELAY END
program end (Delay end) time.
For a detailed description, see→ Various
cycles and functions.
G---ONE TOUCH
M-Smart wash cycle.
For a detailed description, see→ Various
cycles and functions.
H---START/PAUSE
button to start or pause a wash cycle.
• Add clothes during the program is
running:
Once the cycle has begun, if you want to
pause the wash cycle, please long press the
button again. If the DOOR LOCK symbol
not illuminated, the door may be opened, you
can add or take out laundry.
To start the wash cycle from the point at which
it was interrupted, press the button again.
For a detailed description, see→ Various
cycles and functions.
I---STAINS
type of dirt so as to optimally adjust the cycle
for removing the stains. There are eight types
of dirt can be selected.
For a detailed description, see→ Various
cycles and function.
101
button: Press to
button: Press to set the
button: Press to set the
button: Long press the
button: Press to selecting the
is

Advertisement

Table of Contents
loading

Table of Contents