Do you have a question about the RSW-1-10001 and is the answer not in the manual?
Questions and answers
Summary of Contents for Soluna RSW-1-10001
Page 1
Due to product upgrade and other factors, the content of this manual might change from time to time. Please take actual product as standard and get latest manual from soluna. Unless otherwise agreed herein, this manual will only be used as guidance. Any statement,information or suggestion in this manual will not take any form of responsibility.
Page 2
Model:RSW-1-10001 Step2: Check Indicator light Lights Implication Status Description(All lights are single green lights.) 1. Light keeps on: Logger connected to the device. Communication 2. Light off: Connection to the device failed. with device 3. On 100ms/Off 100ms(Fast flash): Communicating with device.
Page 3
Please make sure Bluetooth and WiFi are ON and the router can connect to the network normally. 1. Registration Go to Soluna eCloud App and register. Click "Register" and create your account here. Attention: The APP is only open for end users to register. Distributors, dealers, and installers should contact the platform customer service to obtain the corresponding account through the platform background and then login.
Page 4
Model:RSW-1-10001 2. Create a plant Navigate to the "Power Plant" page and click on the "..." button in the upper right corner to enter the power plant creation page. Complete the power plant information as prompted (fields marked with "*" are required).
Page 5
Model:RSW-1-10001 4. Network Configuration Step 1: Go to "Me", click "Config Network", connect to the network. (Please make sure Bluetooth and WiFi are ON, and make sure your phone is connected to the correct WiFi ) Step 2: Short Press the "white button" 1-2 seconds to make the WiFi stick enter the config network...
Page 6
Model:RSW-1-10001 Step 3: Scan the Bar Code on the stick logger or input it manually. Check the WIFI SSID and input the password of the router, then click “Start Config”. Step 4: Please wait for a few minute. Then click "Done" and finish the Network Configuration.
Page 7
Model:RSW-1-10001 Step 5. Battery information will be displayed in 10-15 mins. If configuration failure occurs, please check the following reas on and try it again. 1) Make sure WLAN is ON. 2) Make sure WiFi is normal. 3) Make sure wireless router does not implement the white-black list.
Page 8
Model:RSW-1-10001 If you have any technical queries about our products, please contact us and provide the following information: 1)Product model and serial number of stick logger. 2)Product model and serial number of connected device. Thank you for your support and cooperation!
Need help?
Do you have a question about the RSW-1-10001 and is the answer not in the manual?
Questions and answers