Brookstone 322962 - Magnet Mount Vent Phone Holder Manual

Also See for 322962:

Table of Contents

CAUTION

Prolonged exposure to heat and cold (e.g., direct sunlight, a heater or air conditioning) can affect your phone.
Once the Magnet Mount Vent Phone Holder is in place, move vents gently.
The Magnet Mount Vent Phone Holder uses magnets. Keep away from credit cards and other magnetic media.
Magnets may interfere with medical devices, such as pacemakers.
The adhesive on the metal plates is designed for onetime use; it cannot be reused if removed.
If the metal plate is removed, use a nonabrasive cleaning solution to remove residual adhesive from your phone or phone case.
Always keep your eyes on the road and follow local hands-free laws.

Squeeze to open the vent clip.
Position on a vent. Ensure that the clamp attaches firmly and the vent provides a stable base for the phone holder.

Position the phone holder and phone so they do not interfere with any vehicle operation or block road vision.
Using the alignment notches, place the deflector on the phone holder and press to attach.
Use of the deflector is optional. The deflector channels air around your phone, helping to keep it from getting too hot or cold. The deflector does not block use of the vent.
Peel the paper off one of the metal plates and attach it to the back of your phone, to your phone case, or under the phone case.
Use the larger plate if you prefer to position your phone horizontally; use the smaller plate to position your phone vertically.
Note that placing the metal plate under a thick protective case may weaken the magnetic attraction that holds your phone to the holder.
Place your phone on the Magnet Mount, allowing the magnetic plate to securely hold your phone.