Advertisement
to your new digital Baby Monitor!
Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom.
This User's Guide provides you with all the information you need to get the most from your product.
Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the mains power to carry it to another location. Please read the Safety Instructions before you install the units.
1 x Parent Unit
1 x Baby Unit
2 x Power adapter
This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device.
Charging the parent unit fully before use is recommended.
This will allow the unit to operate on battery in the event of a power failure.
Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.
NOTE
Do not place the baby unit within baby's reach! If there is interference on the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment.
The enclosed baby unit has already been registered, You do not need to register it again unless the baby unit loses its link with the parent unit. See section "Camera Registration" for more details.
Press VOX key will turn on VOX mode. The VOX mode automatically puts the display in sleep mode to save battery. It reactivates automatically, when it detects noise in the baby's room.
Press music key will turn on the music player and play lullaby through the baby unit; press music key again will turn off it.
Press and hold PTT key on the parent unit to talk to your baby through the baby unit loudspeaker. The symbol will be displayed at the bottom of the screen.
When the video is playing mode, press Volume- key to decrease volume or Volume+ key to increase volume. The display will show the current volume for 5 seconds.
Press "OK/Menu" key at monitoring screen will enter the main menu, It contains 6 items:
Press "Return" key will back to monitoring screen
Press "OK/Menu" key to entry registering screen, then push the pair key on the back of baby unit within 10 seconds.
Press "PTT" key to move the cursor and "Up/Down" key to change value.
There are contains 2 items in this menu
Set time / date
Set format
Press "PTT" key to move the cursor and "Up/Down" key to change value.
Switch the unit to Celsius or Fahrenheit
You are able to adjust the frequency of 50 / 60 HZ to suit your lighting for anti-flicker
You are be able to adjust the brightness of the LCD you are viewing and the LCD backlight active time in menu operation.
This menu allows you to choose the working mode from the following: Normal mode / VOX mode
Switch the Vox sensitivity at Low / Medium / High level
Language setting menu allows you to choose your language from the following:
English
French (Francais)
Spanish (Espanol)
Portuguese (Portugues)
Italian (Italiano)
German (Deutsch)
Turkey (Turkce)
Russian
There are contains system information such as Project id, Hardware version, software version, build date etc.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the VB603 that isn't answered in the manual? Leave your question here.