Spin Spa Spinning Spa Brush Quick Start Guide
Also See for Spinning Spa Brush:

Advertisement

Spin Spa Spinning Spa Brush Quick Start Guide

ATTACHMENTS/FEATURES

ATTACHMENTS/FEATURES

  1. Pumice Stone: Smooths rough and calloused skin. Use with light pressure. Limit use to 3-4 seconds at a time
  2. Microdermabrasion Attachment: Exfoliates skin and can be filled with your favorite liquid soap (see below instructions)
  3. Massage Attachment: Gentle cleaning and soothes aches and pains
  4. Cleansing Attachment: Gentle Cleaning
  5. Mesh Sponge: Gentle Exfoliation

NOTE: The Spin Spa is designed for use in the shower. Do not submerge or use in the bathtub.

NOTE: To Fill The Microdermabrasion Attachment With Soap

  1. Ensure unit is turned off.
  2. Remove the attachment by pulling away from the handle.
  3. Pull the plug out on the side of the head (see Illustration #1).
  4. Pour in a small amount of your favorite liquid soap (see Illustration #2).
  5. Secure the plug and reattach the attachment to the unit's head.

INSTALLING/CHANGING THE BATTERIES

Spin Spa requires three (3) AA Batteries

  1. Push button A, then slide Battery door off to install batteries (see Illustrations #3 & #4)
    INSTALLING/CHANGING THE BATTERIES - Step 1
  2. Insert 3 new AA batteries.
    • Do not get water into battery compartment.
    • Do not open compartment while showering.
    • Be sure that you and appliance are completely dry before opening the battery door.
  3. Slide the battery door back on, ensuring it slides under rails (B).
    INSTALLING/CHANGING THE BATTERIES - Step 2

USING YOUR SPIN SPA

  1. Align and attach the desired attachment to the Spin Spa Head (See illustration #6).
  2. To change attachments, pull outwards (See illustration #7).
  3. Apply soap to the brush attachment.
  4. Press on/off button, to activate Spin Spa (See illustration #8).
  5. Adjust speed by pressing the hi/low button (see illustration #9).

CLEANING YOUR SPIN SPA

  1. Rinse soap from attachments with warm water after every use, allow attachments to dry completely before reattaching to the handle.
  2. Wipe Spin Spa with a damp cloth.

USER MAINTENANCE INSTRUCTIONS

  • No lubrication is necessary. Keep all surfaces clean and free of dust, dirt or debris.
  • If any malfunction occurs, DO NOT attempt to repair the unit. This appliance has no user-serviceable parts
  1. Shower use only. Do not submerge! Not for use in bath tubs!
  2. Supervision is recommended when this appliance is used by/on/or near individuals with disabilities.
  3. Use this appliance only for its intended uses as described in this manual. DO NOT use attachments that are not included in the Spin Spa offering.
  4. Do not use this product if battery compartment is exposed or battery door is not fully installed.
  5. Keep away from heated surfaces
  6. DO NOT mix old/new batteries
  7. DO NOT mix alkaline, standard, or rechargeable batteries.
  8. Batteries must be recycled or disposed of properly.
  9. Do not use on broken skin or areas of the skin with a rash, severe acne or other skin ailments.
  10. Keep away from hair.
SAFETY FEATURE: To prevent damage, the attachments are designed to come loose & may fall off if too much pressure is applied.


Wayne, NJ 07470
Made in China © 2016 Ideavillage
customerservice@ideavillage.com
SPNSP122216MW

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Spin Spa Spinning Spa Brush Quick Start Guide

Advertisement

Need help?

Need help?

Do you have a question about the Spinning Spa Brush and is the answer not in the manual?

Questions and answers

Table of Contents