Using The Home Feature Of The Webos Tv - Furrion Aurora FDUP50Y1A User Manual

Using the Home Feature of the webOS TV

The home screen will be displayed automatically when the TV is turned on. If not,
press the button on the remote control.
Launch search
1
Use buttons to navigate to and highlight
You can search for a variety of content and information using the desired search
terms.
NOTE: You must connect to the network to use the search feature. The search results
may vary depending on the channel, region, network settings, and whether you have
agreed to the terms and conditions.
Use home dashboard
2
Use buttons to navigate to
dashboard. You can select or control a device (mobile, external device, Home IoT
Devices, etc.) connected to the TV.
Switch the TV input used recently
3
Use buttons to navigate to and focus on
used TV input in the list quickly.
Run or close a recently used app
4
Press and hold the
focus on . You can run or close a recently used app in the list of preview area.
Run, move or delete the apps installed
5
Use buttons to navigate to and focus on the app, it will provide the preview of
the app at the top. You can check or run useful features of the app and recommended
content on the preview without entering into the app.
NOTE: Some apps may not provide the preview.
CCD-0007276 Rev: 07-24-23
or press and hold the
button for 2 seconds or use
, then press
, you can switch to the recently
- 21 -
to start searching.
button to select home
buttons to navigate to and