Next ASHER 864240 Assembly Instructions

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline:
If you have any problems with this product or
require any replacement fittings please contact
Customer Services Tel: 0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the
item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep ttings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of persons persons is required to assemble this product.

PRODUCT INFORMATION

• Made from steel with a nickel plated finish and poplar sprung wooden slats.
• Made in China.

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Do not use abrasive cleaning products or those containing silicone.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to
prevent scratching or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly xings should always be tightened properly and periodically check all fixings and tighten if
necessary.

FITTINGS

ASHER NICKEL BED 864240
ASSEMBLY INSTRUCTIONS.
Page 1 of 5