Audiolab 9000N User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

VOL

SELECT

9000N

User Manual

Table of Contents

Need help?

Do you have a question about the 9000N and is the answer not in the manual?

Questions and answers

Summary of Contents for Audiolab 9000N

Page 1 SELECT 9000N User Manual...
Page 2 Important Safety Information Do not install this equipment in a conﬁned or built-in space such as a bookcase or similar unit, and keep well ventilated in an open space. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains etc.
Page 3 & your body. measures: Being Roon Ready means that 9000N uses Roon streaming • Reorient or relocate the receiving antenna. technology, for an incredible user interface, simple setup, •...
Page 4: Table Of Contents
Contents Audiolab 9000N 1. Getting Started 2. Controls and Functions 3. Remote Handset 4. Connections 5. Menu Options 6. System Functions 7. Network Connection 8. Playback Functions 9. Warranty Coverage 10. Speciﬁcation...
Page 5: Getting Started
• USB 2.0 port for replaying audio from a compatible host Before you connect the Audiolab 9000N to the AC mains power, ensure your AC mains voltage corresponds to the rating on the rear panel of the product. If in •...
Page 6: Controls And Functions
Display Standby Button Volume Control Power Switch Analogue outputs Wi-Fi Antenna POWER Made in China OUTPUT OUTPUT NETWORK PLAYER MODEL: 9000N TRIG Mains Input 12V trigger COAX USE ONLY WITH A 250V FUSE LINK ETHERNET RESET UPDATE AC 220-240V~50/60Hz 40W...
Page 7: Remote Handset
9000 system. 12.SOURCE Press to select the input source The remote control supplied with your 9000N can be DEVICE easily identiﬁed by the two white separator lines Press to go back up one level in the Menu, or 13.
Page 8: Connections
DIGITAL Audiolab ampliﬁers or third-party compatible equipment). Use the Note: The digital outputs will not be active when the 9000N is operating in 'Full input when the 9000N is to be controlled (ie. by Audiolab 9000A, or Decode (PCM Upsampling ON)' mode. This is due to the operational sample rate third-party compatible equipment).
Page 9 • Full Decode (PCM Upsampling Oﬀ) - This enables the full internal MQA decoding 9000N has 11 diﬀerent menu pages. Press the MENU key on the remote to enter Full Decode (PCM Upsampling Off) process of the 9000N, and simultaneously MENU mode.
Page 10 Settings / Volume integrated ampliﬁers' AUX input, and therefore using the integrated ampliﬁers volume control. When set to ADJUSTABLE, the 9000N Volume control is used to adjust the level of the analogue output. This is required when connecting Output directly to a power ampliﬁer.
Page 11: Menu Options
Wi-Fi RSSI clariﬁcation: System VER 0.66 The RSSI value is an indication of how well your 9000N can hear a signal from your access point or router. PC USB VER 2.10 Anything between -67dBm and -40dBm is ideal, and the closer the value to 0dBm, the better the wireless streaming performance.
Page 12: System Functions
Rotate the VOL knob on the front panel, or use the Volume up/ down keys on the remote control, to set the volume level. The range is -78dB to 0dB, the factory default volume setting is -30dB. When coming out of standby the 9000N will be set to the previous used volume setting, except if louder than -20dB, in which case the volume will default to -20dB.
Page 13 If your router supports WPS mode, short press the WPS button on the rear panel of the 9000N. Then press the WPS button on your router. After a few seconds, the 9000N will show a RED Wi-Fi icon to denote successful connection.
Page 14 7: Network Connection Page 14 After connecting to the internet, in the options menu of the settings page, you can rename your 9000N, log in toTidal/Spotify/Qobuz/TuneIn, turn on or turn oﬀ Ethernet LEDs and switch on or switch oﬀ Roon Ready.
Page 15: Network Connection
Page 15 An Internet connection is necessary to Connection example install the app on a tablet or smartphone To Internet to update this unit's NET ﬁrmware and to use Internet radio, for example. Wi-Fi router LAN cable Tablet/smartphone To 9000N SELECT...
Page 16 DSDIFF (DFF), DoP, MP3, ACC again to pause the playback. Compatible Drive speciﬁcations The 9000N is compatible with a variety of USB disks. They are required to be: Single-partition only, FAT32, exFAT and NTFS format only, Previous/Next track Size: Max 4TB is recommended. Depending on the model and make, up to 8TB is possible but not guaranteed due to individual drive speciﬁcations.
Page 17: Playback Functions
NAS/UPnP Connect your NAS (FAT32, exFAT or NTFS) to the same router as the 9000N. The NAS will be identiﬁed as a Music Library. You can manage your music media with the Roon app or by playing the tracks on the NAS directly from within the 9000N app.
Page 18 9: Warranty Coverage Page 18 Audiolab Ltd. warrants this product, subject to the terms and conditions below, to be application. Incorrect dates or mismatched purchase receipt dates that are outside of the warranty terms will immediately invalidate any warranty claim.
Page 19: Warranty Coverage
A worldwide distributors list is available on the Audiolab website: www.audiolab.co.uk Other than the warranty and services set out in this warranty, to the fullest extent permitted by law, Audiolab shall not be liable to you and/or any third party or entity whatsoever for:...
Page 20 Page 20 10: Specification BRAND Audiolab Model 9000N General Description Network Player Design Philosophy And Core Technology ESS Sabre ES9038Pro 32bit DAC Quad Arm® Cortex®-A53 core,1.8GHz per Core LUMIN MUSIC Streaming technology (IEEE 802.11 a / b / g / n / ac,2.4/5GHz) UPnP AV protocol with audio streaming extension (Open Home) Built-in Certiﬁed MQA Full decoder (via streaming &...
Page 21: Specification
Page 21 10: Specification Supported File Formats DSD Lossless: DSF (DSD), DIFF (DSD), DoP (DSD) PCM Lossless: FLAC, Apple Lossless (ALAC), WAV, AIFF Compressed (lossy) Audio: MP3 MQA Sampling Frequency PCM: 44.1kHz-768kHz (705.6kHz / 768kHz Fixed-point supported via Lumin Music App streaming) DSD: DSD64, DSD128, DSD256, DSD512 (Native) Digital Section Digital Output Voltage...
Page 24 Audiolab IAG House, 13 /14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, Telephone: +44(0)1480 452561 Email: service@audiolab.co.uk http://www.audiolab.co.uk...