Table of Contents
Advertisement
Right
1. Power button
2. 4-in-1 memory card reader slot
3. USB (3.1 Gen 1) Type-A connector
4. USB (3.1 Gen 1) Type-A connector
(always-on)
Table 2. Power light status
Power button light status
Solid white
Fast blinking white
Slow blinking white
Off
Press the button to turn on the computer or put the computer into
sleep mode.
The light on the power button shows the system status of your
computer.
Insert an SD card, SDHC card, SDXC card, or a MultiMediaCard
(MMC) into the slot for data transfer or storage.
Connect a USB-compatible device, such as a USB keyboard, a USB
mouse, a USB storage device, or a USB printer.
Connect a USB-compatible device, such as a USB keyboard, a USB
mouse, a USB storage device, or a USB printer.
The always-on connector can charge external devices when the
computer is turned off, in sleep or hibernation mode. The always-on
function can be turned on or off in the UEFI/BIOS setup utility.
Note: If Lenovo Vantage is pre-installed on your computer, you can
also set always-on function from within that software.
Computer
Turned on
Turned on
In sleep mode
Turned off or in hibernate mode
Battery capacity
21% – 100%
1% – 20%
/
/
.
Chapter 1
Meet your computer
5
Advertisement
Table of Contents
