Table of Contents
Advertisement
USER GUIDE
Power Button
Press and hold this button down for three seconds to power your unit on. Once pressed, the "Indicator Light"
will illuminate to indicate the unit is on and running. Press and hold this button for three seconds again and the
unit will power off and the "Indicator Light" will turn off.
Up Button
Press this button to increase the setting temperature by one (1) degree increments.
Lower Zone Temperature
Press this button to decrease the setting temperature by one (1) degree increments.
Interior Light
Press this button to turn on or off the internal light.
This refrigerator is equipped with top internal lights, illuminating the interior to be seen through the glass
door. You can choose to display light in two different modes: Display Mode and Automatic Mode.
* Display Mode
The internal lights will stay constantly illuminated whether the door is open or closed. Display Mode is a
custom/user-defined function, not a regular day to day function
* Automatic Mode
The internal lights will illuminate each time the door is opened and fade off once the door is closed. This feature
is triggered by a sensor located on the front vent. This sensor allows the refrigerator to recognize when the
door is open or closed.
*The default mode is Automatic Mode. To change between modes, press the Interior Light button
We run test every unit that we produce in our factory. Because of this, your model may default to any of the
above settings out of the box. Simply cycle through the progression of settings until you reach your desired
setting.
Tip: Close the door to determine if the light is currently in Display Mode or Automatic Mode. In Display Mode
the lights will remain on, and in Automatic Mode the lights will fade off once the door is closed.
16
www.titan-appliances.com
.
Advertisement
Table of Contents
