Models with smart entry system
Message
Appears after the driver's door is opened when the
●
power mode is in ACCESSORY.
Appears when you close the door with the power
●
mode in ON without the smart entry remote inside
the vehicle.
Appears when the smart entry remote battery
●
becomes weak.
Appears if the smart entry remote battery is too
●
weak to start the engine or the key is not within
operating range to start the engine. A beeper
sounds six times.
Appears three seconds after the To Start Engine:
●
Brake + Push message appears.
Appears three seconds after you bring the smart
●
entry remote in front of the ENGINE START/STOP
button when To Start, Hold Remote Near Start
Button appears. To Start Engine: Brake + Push
appears sequentially.
uuIndicatorsuMulti-Information Display Warning and Information Messages
Condition
Explanation
Press the ENGINE START/STOP button twice with your
●
foot off the brake pedal to change the power mode to
VEHICLE OFF (LOCK).
Disappears when you bring the smart entry remote back
●
inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 142
Replace the battery as soon as possible.
●
2 Replacing the Button Battery P. 551
Bring the smart entry remote in front of the ENGINE
●
START/STOP button to be touched with.
2 If the Smart Entry Remote Battery is Weak P. 570
2 Changing the Power Mode P. 140
2 Changing the Power Mode P. 140
*
Continued
91