Advertisement
Table of Contents
Advertisement
Chapters
Table of Contents
Related Manuals for YAT FPCS1800A
Summary of Contents for YAT FPCS1800A
- Page 1 设计人员: 梁光灿 邮箱: 制作日期: 2022-11-15 运用软件: Adobe Acrobat 9 Pro guangcan.liang@yat.com TEL:0573-83225888-503 Http:www.yattool.com 名 称: 说明书 颜 色: 黑白印刷 客 户: CH045 页 数: 13张A4纸 料 号: 8458-433400X106-031 备注: 成品尺寸: A5(148.5x210mm) 材 质: 80g铜版纸 材质符合欧盟包装指令（94/62/EC） 高度 > 高度 > 高度 > 高度 >...
- Page 2 1800W Electric Chain Saw FPCS1800A EAN: 3663602627401...
-
Page 3: Table Of Contents
FPCS1800A Let’s get started... These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Safety information Your product Before you start more detail... Product functions Operation Care and maintenance... - Page 4 Safety information FPCS1800A Safety warnings General power tool safety warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.The term “power tool”...
-
Page 5: Safety Information
Safety information FPCS1800A and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. > Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. - Page 6 Safety information FPCS1800A switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
- Page 7 Safety information FPCS1800A before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. > Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Page 8 Safety information FPCS1800A chain when the chain saw is operating. Before you start the chain saw, make sure the saw chain is not contacting anything. A moment of inattention while operating chain saws may cause entanglement of your clothing or body with the saw chain.
- Page 9 Safety information FPCS1800A wood fibres is released the spring loaded limb may strike the operator and/or throw the chain saw out of control. > Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be whipped toward you or pull you off balance.
- Page 10 Safety information FPCS1800A reverse reaction, kicking the guide bar up and back towards the operator.Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious personal injury.
- Page 11 Safety information FPCS1800A Additional safety warnings > The product should be supplied via a residual current device (RCD) with a tripping current of not more than 30 mA. > Position the cord so that it will not be caught on branches and the like, during cutting.
- Page 12 Safety information FPCS1800A To reduce the impact of noise and vibration emission, limit the time of operation, use low- vibration and low-noise operating modes as well as wear personal protective equipment. Take the following points into account to minimize the vibration and noise exposure risks: >...
- Page 13 Safety information FPCS1800A operation again. Recommendation for class ll machine > The machine should be supplied via a residual current device(RCD) with atripping current of not more than 30 mA. > If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified in order toavoid a hazard.
- Page 14 Safety information FPCS1800A include: numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin colour or condition. These symptoms normally appear in the fingers, hands or wrists. The risk increases at low temperatures. WARNING! This product produces an electromagnetic field during operation! This...
- Page 15 Safety information FPCS1800A Symbol explanation Caution / Warning. Read the instruction manual. Wear hearing protection. Wear eye protection. Wear respiratory protection. Wear safety helmet! Wear face protection! Wear protective gloves. Wear safety footwear. Switch the product off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation.
- Page 16 WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. FPCS1800A : FP-OPP, CS-Chain Saw...
-
Page 17: Your Product
Your product FPCS1800A Your product 1. Front handle 13. Cable strain relief 2. Front guard/chain brake 14. Power cord with plug 3. Tension screw 15. Oil tank cap 4. Saw chain 16. Lock-off button 5. Guide bar 17. On/off switch 6. - Page 18 Your product FPCS1800A Unpack > Unpack all parts and lay them on a flat, stable surface. > Remove all packing materials and shipping devices if applicable. > Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer.
-
Page 19: Before You Start
Before you start FPCS1800A Assembly Assemble the guide bar and saw chain before operation. Follow the operating instructions step-by-step and use the pictures provided as a visual guide to easily assemble the product. WARNING! Read all the instructions carefully! Do... - Page 20 Before you start FPCS1800A WARNING! Always use a saw chain designed as “low- kickback” or a saw chain which meets the low-kickback requirements! A standard saw chain (a chain which does not have the kickback reducing guard links) should only be...
- Page 21 Before you start FPCS1800A > Replace the cover (10) and slightly tighten the retaining nut (9) clockwise with the wrench (8) (Fig. 7). Do not tighten the locking nut completely; saw chain tensioning is required first. Fig. 7 NOTE: The saw chain (4) has not yet been tensioned.
- Page 22 Before you start FPCS1800A > Set the product on a suitable flat surface. > Turn the tension screw (3) clockwise until the chain “tie straps” are just touching the bottom edge of the guide bar (5) (Fig. 8). Fig. 8 >...
- Page 23 Before you start FPCS1800A Chain lubrication WARNING! The product is not filled with oil. It is essential to fill the product with oil before using it! Never operate the product without chain oil or with an empty oil tank, as this will...
- Page 24 Before you start FPCS1800A > Check the oil level window (11) prior to start-up and regularly during operation. Refill oil when the oil level is lower than “MIN” marking (Fig. 13). > Wipe up spilled lubricant with a soft cloth and refit the tank cap (15).
- Page 25 Before you start FPCS1800A Connection to the power supply (not for UK) WARNING! For your safety, it is required that the plug attached to this product is always connected to an extension cable! The extension cable must be suitable for outdoor...
-
Page 26: In More Detail
FPCS1800A more detail... Product functions Operation Care and maintenance Trouble shooting Recycling and disposal Guarantee Technical specifications EC declaration of conformity... -
Page 27: Product Functions
FPCS1800A Intended use This chain saw FPCS1800A is designated with a rated input of 1800 Watts. The product is intended for cutting logs with a thickness of max. 326 mm. It must not be used for cutting other materials, such as plastic, stone, metal or wood that contains foreign objects. - Page 28 Product functions FPCS1800A Chain brake test The following functional check should be carried out before each use. The purpose of the chain brake test is to reduce the possibility of injury due to kickback. > Make sure the chain brake (2) is disengaged. Disengage the chain brake (2) by pulling it back towards the front handle (1) (Fig.
- Page 29 Product functions FPCS1800A On/off switch > Make sure the safety chain brake (2) is disengaged (see above Fig. 16). > Grip the product with both hands, your left hand holding the front handle (1) (do not hold the chain brake) and your right hand holding the rear handle (18).
- Page 30 Operation FPCS1800A General operation > Check the product, its power cord and plug as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. > Double check that accessories and the guide bar/saw chain are properly fixed.
-
Page 31: Operation
Operation FPCS1800A > The saw chain (4) must be running at full speed before it makes contact with the wood. Use the spike bumper (21) to secure the product onto the wood before starting to cut and use it as a leverage point while cutting (Fig. - Page 32 Operation FPCS1800A Kickback WARNING! Beware of kickback! Kickback can lead to dangerous loss of control of the product and result in serious or fatal injury to the operator or anyone standing close by! Always be alert because rotational kickback and pinch...
- Page 33 Operation FPCS1800A > With a basic understanding of ‘kickback’, the element of surprise can be reduced or eliminated. Sudden surprise contributes to the majority of accidents. > Keep a good firm grip on the product with both hands, your right hand on the rear handle (18) and your left hand on the front handle (1), when the motor is running.
- Page 34 Operation FPCS1800A > Before felling is started, consider the natural lean of the tree, the location of larger branches and the wind direction to judge which way the tree will fall. > Remove dirt, stones, loose bark, nails, staples and wire from the tree.
-
Page 35: Operation
Operation FPCS1800A Limbing and pruning Limbing is removing the branches from a fallen tree. When limbing leave larger lower limbs to support the log off the ground. Remove the small limbs in one cut (Fig. 30). Branches under tension should be cut from the bottom up to avoid binding the product. - Page 36 Operation FPCS1800A Bucking a log Bucking is cutting a log into lengths. It is important to make sure your footing is firm and your weight is evenly distributed on both feet. When possible, the log should be raised and supported by the use of limbs, logs or chocks.
- Page 37 Operation FPCS1800A > Support small logs on a sawing stand or another log while bucking (Fig. 35). Fig. 29 > If the wood diameter is large enough for you to insert a soft bucking wedge without touching the chain, you should use the wedge to hold the cut open to prevent pinching (Fig.
-
Page 38: Care And Maintenance
Care and maintenance FPCS1800A The golden rules for care WARNING! Always switch the product off, disconnect it from power supply and let the product cool down before performing inspection, maintenance and cleaning work! Keep the product clean. Remove debris from it after each use and before storage. - Page 39 Care and maintenance FPCS1800A Sprocket nose NOTE: It is not necessary to remove the saw chain (4) to lubricate the sprocket nose (6). Lubrication can be done on the job. > Clean the sprocket nose (6). > Using a disposable lube gun, insert the nose of the needle into the lubrication hole (Fig.
- Page 40 Care and maintenance FPCS1800A NOTE: The condition of the oil passages can be easily checked. If the passages are clear, the chain will automatically give off a spray of oil within seconds of the product starting. Your product is equipped with an automatic oiling system.
- Page 41 Care and maintenance FPCS1800A > Have your chain (4) sharpened professionally at an authorised service centre or sharpen the chain yourself using a proper sharpening kit. Also observe the sharpening instructions supplied with the sharpening kit. WARNING! Only sharpen the saw chain yourself if you are...
- Page 42 Care and maintenance FPCS1800A > A file guide is available from most Sharpening angle 25° reputable tool merchants and is File Left-hand direction the easiest way to hold the file at cutter the correct position. Outside > File at an angle perpendicular to Inside the bar, and at an angle of 25°...
- Page 43 Care and maintenance FPCS1800A Power cord > If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a safety hazard. Plug replacement (only for UK market) If you need to replace the fitted plug, then follow the instructions...
- Page 44 Care and maintenance FPCS1800A Repair > This product does not contain any parts that can be repaired by the consumer. Contact a qualified specialist to have it checked and repaired. Storage > Clean the product as described above. > Store the product and its accessories in a dry, frost-free place.
-
Page 45: Trouble Shooting
Trouble shooting FPCS1800A Trouble shooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these... -
Page 46: Recycling And Disposal
Recycling and disposal FPCS1800A Recycling and disposal > Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. > Petrol, oil, old oil, a mixture of oil and petrol and objects soiled with oil e.g. -
Page 47: Guarantee
Guarantee FPCS1800A Guarantee This product carries a guarantee of 24 months starting from the day of purchase. Please retain your receipt as a proof. This guarantee specifically excludes losses due to: - Normal wear and tear, including accessory wear - Overload, misuse or neglect... -
Page 48: Technical Specifications
FPCS1800A Technical specifications Technical specifications General : 220 - 240 V~, 50 Hz > Rated voltage > Rated input : 1800 W : 8560/min > Rated no load speed n > Guide bar length : 360 mm (14 “) : OREGON 140SDEA041 >... -
Page 49: Ec Declaration Of Conformity
EC declaration of conformity (UK) DECLARATION OF CONFORMITY Product • Electric chain saw 1800W • FPCS1800A • Serial number range 000001 to 999999 Name and address of the manufacturer or his authorised representative: Kingfisher International Products Limited 3 Sheldon Square... - Page 50 Product/ Produit/ Produkt/Produsul/Producto/Produto • Chainsaw 1800W/ Tronçonneuse 1800W/ Pilarka łańcuchowa 1800W/ Motoferăstrău 1800W/ Motosierra 1800W/ Motosserra 1800W • FPCS1800A • Serial number range 000001 to 999999 Name and address of the manufacturer or his authorised representative: Nom et adresse du fabricant ou de son mandataire: Nazwa i adres producenta lub jego upoważnionego przedstawiciela:...
- Page 51 EC declaration of conformity FPCS1800A 2006/42/EC as amended Machinery Directive 2014/30/EU as amended Directive Electromagnetic compatibility 2000/14/EC as amended Outdoor Noise Directive 2011/65/EU as amended Directive Restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2006/42/CE relative aux machines 2014/30 / UE telle que modifiée Directive Compatibilité...
- Page 52 FPCS1800A EC declaration of conformity Authorised signatory and technical file holder/signataire et responsable de la documentation technique authorisé/ podmiot uprawniony do wystawienia i adres prezechowywania dokumentacji technicznej/semnatar autorizat și deținător al dosarului tehnic/firmante autorizado y titular del expediente tecnico/ signatário autorizado e detentor da ficha técnica...
- Page 53 Manufacturer,Fabricant,Producent,Producător,Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square, London, W2 6PX United Kingdom www.kingfisher.com/products EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.kingfisher.com/products www.diy.com To view instruction manuals online, visit www.kingfisher. www.screwfix.com com/products www.screwfix.ie www.castorama.fr Pour consulter les manuels d’instructions en ligne,...
Need help?
Do you have a question about the FPCS1800A and is the answer not in the manual?
Questions and answers