Casio CDP-240R User Manual page 27

Deleting a Sampled Sound
You can use the following procedure to specify a sampled
tone number and delete its data.
1. 
Press (FUNCTION) and then use the
(10-key) [4] ( ) and [6] ( ) keys to display
"DELETE" (page EN-7).
D E L E T E

2.
Press the (10-key) [9] (ENTER) key.
S 1 : O r
Used memory
(Unit: Kbytes)
3. 
Use the (10-key) [–] and [+] keys to select
the tone number of the data you want to delete.

4.
Press the (10-key) [9] (ENTER) key.
This displays a delete confirmation message.
S u r e ?
5. 
Press the (10-key) [+] (YES) key to delete the
data, or [–] (NO) or [7] (EXIT) to cancel the
delete operation.
• After the delete procedure is complete, "Complete" will
appear on the display followed by the screen in step 1
of the above procedure.
• For information about deleting individual drum sounds
in a drum sampling set, see "Editing Sampled Drum Set
Sounds" on page EN-23.

Flashes
n l
g
Remaining
memory capacity
Sampling Sounds and Playing Them on the Digital Piano
Protecting Against Accidental Deletion of
Sampled Sounds
You can use the following procedure to protect each sampled
sound against accidental deletion.

1.
Press
enter the tone number of the sampled tone you
want to protect.
2. 
Press
(10-key) [4] ( ) and [6] ( ) keys to display
"SAMPLING" (page EN-7).
3.
Press the

4.
Use the
display "Protect".
5.
Press the
protection.
Once protected a tone cannot be deleted.
A protected tone is indicated as shown below.
Protected
■ Saving Sample Data on an External Device
• Memory card (page EN-60)
• Computer (page EN-67)

(TONE) and then use
(FUNCTION) and then use the

(10-key) [9] (ENTER) key.
(10-key) [4] ( ) and [6] ( ) keys to
P r o t e c t

(10-key) [+] key to turn on
* 1 : O r
(10-key) to

n l
g
EN-25