INTRODUCTION Thank you for purchasing this CLARKE Head-torch. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you and you can look forward to your purchase giving you long and satisfactory service.
GENERAL SAFETY PRECAUTIONS Please read and understand the following instructions before use. 1. DO NOT shine directly into your own, another person’s or an animal’s eyes. 2. DO NOT allow children to use the head torch. 3. DO NOT use the torch if you suspect that the battery or the torch casing is damaged.
OPERATION TORCH OPERATION 1. Press the power button (fig.1) once to turn the light on. 2. Press the power button twice (fig.1) to put the light into flashing mode. 3. Press again to turn the unit off. 4. Swivel the lamp by up to 40 to suit the task.
2. Press the power button twice for a flashing red light. 3. Use the dimmer switch to select high or low illumination. • To keep your worklight clean, wipe with a damp cloth only, DO NOT use detergents, chemicals or harmful abrasives. Never immerse in water.
COMPONENT PARTS No Description No Description No Description Headband Housing base Screw Housing Screw Screw Switch PCBA Battery box base LED module Screw Headband support Lens Switch cap Screw Reflector USB rubber Screw COB LED Right battery box Switch-warning light Module base USB socket Spring cable clip...
Need help?
Do you have a question about the HL400R and is the answer not in the manual?
Questions and answers