Download Print this page

Operation - Atwood MHL2241 Manual

Universal hinged ladder for recreational vehicle

Advertisement

Working down the back wall, secure the upper pair of
standoffs and then secure the lower pair of standoffs to
the rear wall. Once all standoffs are secured, secure the
base pads of the ladder to the rear wall.
MAY CAUSE PERSONAL INJURY OR DEATH
Failure to properly secure the Universal Hinged Ladder
to the vehicle may cause damage or injury. Always
verify that the Universal Hinged Ladder is securely
fastened to the vehicle when installed for use on the
vehicle.
Now that the ladder is secured to the RV, tighten each
hinge bolt to 48 in-lbs to restrict movement in the hinge
and hold the ladder in its current position (see Diagram
#11).
WARNING

OPERATION

MAY CAUSE PERSONAL INJURY OR PROPERTY
For comfort as well as safety, hands should be
completely dry and footwear should have solid
bottoms to provide better grip and support when
climbing a ladder. Bare feet, soft sandals or "flip-flops"
are not recommended.
When climbing onto the Universal Hinged Ladder, grab
onto the rungs of the ladder using a hand-over-hand
method. Always keep a firm grip on the ladder as you
ascend and descend, only releasing one hand before
reaching and grabbing the next location.
ascending and descending the Universal Hinged Ladder
and/or vehicle ladder, always make sure feet are planted
firmly on the occupied step before advancing to the next
step.
MAY CAUSE PERSONAL INJURY OR DEATH
The Universal Hinged Ladder is intended to be used
within the specified limits to securely access the RV
roof. Consider all applied forces including the weight
of the operator, the weight of any additional load the
operator may be handling and any other weight that
may be applied to the ladder. The Universal Hinged
Ladder is not designed to withstand excessive force in
any direction.
CAUTION
DAMAGE
WARNING
While

Advertisement

loading