Table of Contents
Summary of Contents for Schnierle EasyLeg
- Page 1 Instruction manual EasyLeg Leg system for aluminium system floor and rail-in floor Name: BA-KD-004 – instruction manual EasyLeg Revision: 02 – 19.06.2023 Page 1 of 9 © Copyright by Hermann Schnierle GmbH, Dieselstraße 43, 86368 Gersthofen...
-
Page 2: Table Of Contents
Before using your new EasyLeg seat leg for the first time, please read this manual carefully and observe the guidelines and notes. We wish you much pleasure with your new EasyLeg seat leg and may you always have a good trip! Your Schnierle team Content 1. -
Page 3: Guideline And Introduction
1. Guideline and introduction 1.1. Intended use The intended use for your seat leg is to mount your Schnierle seating system on your Schnierle floor system. Any use that varies from this may result in damage and functional faults that may affect safe use of your seat leg as well as seat. -
Page 4: Use Of The Instruction Manual
The seat leg, especially assemblies relevant to safety, should also be checked for damages, strength and function before driving off (see also 2.2. Checks). Name: BA-KD-004 – instruction manual EasyLeg Revision: 02 – 19.06.2023 Page 4 of 9 © Copyright by Hermann Schnierle GmbH, Dieselstraße 43, 86368 Gersthofen... -
Page 5: Checks
Modification or retrofitting work on the seat legs from Hermann Schnierle GmbH may only be carried out by authorised specialist repair shops, trained personnel or after approval by Hermann Schnierle GmbH, taking into account the applicable work instructions and country-specific regulations. -
Page 6: Seat Leg
The lever for the locking mecha- nism must be pointing upwards. Caution The wheels must always face backwards. Name: BA-KD-004 – instruction manual EasyLeg Revision: 02 – 19.06.2023 Page 6 of 9 © Copyright by Hermann Schnierle GmbH, Dieselstraße 43, 86368 Gersthofen... - Page 7 Now your EasyLeg seat leg is en- gaged on the aluminium system floor. Name: BA-KD-004 – instruction manual EasyLeg Revision: 02 – 19.06.2023 Page 7 of 9 © Copyright by Hermann Schnierle GmbH, Dieselstraße 43, 86368 Gersthofen...
-
Page 8: Product Information And Dimensions
Turning device with slide rail available 4.3. Scope of application Passenger compartment in minibuses and vans Name: BA-KD-004 – instruction manual EasyLeg Revision: 02 – 19.06.2023 Page 8 of 9 © Copyright by Hermann Schnierle GmbH, Dieselstraße 43, 86368 Gersthofen... -
Page 9: Dimensions
Managing director: Martin Schnierle, HRB Augsburg 7256 The information contained in this publication corresponds to the status stated below. Hermann Schnierle GmbH reserves the right to make changes to the technology, equipment and form of our products compared to the information in this publication as well as changes to this publication itself.
Need help?
Do you have a question about the EasyLeg and is the answer not in the manual?
Questions and answers