Page 1
Item No. EL5605 DIGITAL REMOTE INTERFACE User’s Manual We are constantly improving our products so specifications are subject to change without notice. Visit our website for the latest product information.
Digital Remote Interface by Wagan Tech ® ® Thank you for purchasing the Digital Remote Interface by Wagan Tech With normal care and proper treatment, it will provide years of reliable service. Please read all operating instructions carefully before use.
Page 4
Digital Remote Interface by Wagan Tech ® 6. Connect the RJ45 end of the cable to either port on the remote display. For installation with the inverter only or both DC to DC charger and inverter: 1. Locate the RJ45 to RJ45 cable included with the remote display.
User’s Manual—Read before using this equipment OPERATING THE REMOTE 1. Press and hold the “Select” button to turn the display on. The Wagan logo will be displayed during startup. 2. Press the up and down buttons to switch between views.
Page 6
• AC frequency - The default setting for the frequency is 60Hz Warning: Before changing this setting, be sure to confirm the frequency requirement of the appliances being connected to the inverter. Wagan will not be responsible for damage to appliances that are not compatible with the inverter setting.
Page 8
WAGAN Corporation disclaims any liability for consequential damages. In no event will WAGAN Corporation be responsible for any amount of damages beyond the amount paid for the product at retail.