Bosch B20CS50 Series Service Manual page 28

4-15. Compensation of F/R-Compartment temperature.
Front PCB button
Freezer Set , Refrigerator Set
Super Freeze , Super Cool
Dispenser , Lock
1. How to start
1) Freezer Compartment : Under "Lock" mode, press "Freeze Set" button 5 times while pressing
"Dispenser" button at the same time.
2) Refrigerator Compartment : Under "Lock" mode, press "Refrigerator Set" button 5 times while
pressing "Dispenser" button at the same time.
3) Initial setting
Freezer Compartment
( 00 )
2. In case change of "Freezer Compartment" ON/OFF temperature
ON/OFF temp.
button
Range of setting Value
Range of Temp. Change
3. In case change of "Refrigerator Compartment" ON/OFF temperature
ON/OFF temp.
button
Range of setting Value
Range of Temp. Change
※ If 10 days passes from initial power on,
the "setting value" is memorized in the EEPROM automatically.
※ In order to clear this "setting value" ,
it is needs "EEPROM clear" ( "Dispenser" + "Water Filter Reset" 5 times)
INPUT
CONTENTS
Refrigerator Compartment
( 00 )
down(-)
Freezer Set
"00" ~ "-30"
0 ~ -2℃
"Temp. Change" = "Setting Value" × "0.072℃"
down(-)
Refrigerator Set
"00" ~ "-30"
0 ~ -3℃
"Temp. Change" = "Setting Value" × "0.1℃"
ON/OFF Temp. of
Freezer & Refrigerator Compartment
up(+)
Super Freeze
"00" ~ "+30"
0 ~ +2℃
up(+)
Super Cool
"00" ~ "+30"
0 ~ +3℃
27
CONTROL OBJECT
REMARKS