Table of Contents
Advertisement
Model SS4-A/-A2 Multi-Spectrum Digital Electro-Optical Fire Detector
Installation Guide and Operating Manual
MAN0931_V3_1510-001_RevH_06-13
3.3
Personnel Training
Troubleshooting of the Model SS4-A/-A2 Detector should be performed only by qualified authorized
personnel observing all standard safety practices. Although the Detector operates on safe 24 Volts DC, the
FM Approved or UL listed Fire Alarm Panel's power supply may operate on life threatening 120 or 240
Volts AC.
susceptible to permanent damage due to electrostatic discharge (ESD). Do
3.4
Detector Repair
Return the defective module to the factory for repair service.
T
HERE ARE
If the Model SS4-A/-A2 Module must be shipped back to the factory for repair, it MUST be packed in static
protective material. If not available, the Module should be carefully wrapped with aluminum foil. An RMA
(Return Material Authorization) is required for all returns to the factory. Contact Fire Sentry Customer
Service at 714-694-2700 or your Distributor for an RMA number before shipping a unit back to the factory.
WARNING: Hazardous voltages may be present during
testing procedures. Serious injury or death may result
due to failure to observe safety precautions.
CAUTION: Model SS4-A/-A2 Detector modules and its components are
handle a module without adequate grounding precautions.
NO
USER SERVICEABLE PARTS IN A
D
.
ETECTOR MODULE
NOT
14
Advertisement
Table of Contents
