DeWalt DCS356E1T Original Instructions Manual page 30

EngLIsh
CORDLESS OSCILLATING MULTI‑TOOL
DCS355, DCS356
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Oscillating frequency
Oscillating angle
Speed 1
Speed 2
Speed 3
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑4:
L (emission sound pressure
PA
level)
L (sound power level)
WA
K (uncertainty for the given
sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
28
WALT one of the
e
DCS355 DCS356
V 18 18
DC
1/2/10/11 1/2/10
Li‑Ion Li‑Ion
min‑ 0–20000 0–20000
1
1.6˚ 1.6˚
min‑ ‑ 15000
1
min‑ ‑ 17000
1
min‑ ‑ 20000
1
kg 1.1 1.1
dB(A) 89 89
dB(A) 97 97
dB(A) 3
m/s 12.4 12.4
2
m/s 1.5 1.5
2
EC‑Declaration of Conformity
Machinery Directive
Cordless Oscillating Multi‑Tool
DCS355, DCS356
WALT declares that these products described under Technical
D
e
Data are in compliance with:
2006/42/EC, EN62841‑1:2015+A11:2022, EN62841‑2‑4:2014
+AC:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
3
31.07.2023
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
CORDLESS OSCILLATING MULTI‑TOOL
WALT declares that these products described under Technical
D
e
Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841‑1:2015+A11:2022, EN62841‑2‑4:2014+AC:2015.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
REGULATIONS 2008
DCS355, DCS356
WALT at the following
e
WALT at
e
WALT.
e
WALT.
e