Stand Instruction - LG 42LD460B Owner's Manual

PREPARATION
STAND INSTRUCTIONS
Image shown may differ from your TV.
ꔛ
INSTAllATION
Carefully place the TV screen side down
1
on a cushioned surface to protect the
screen from damage.
Assemble the parts of the StanD BoDY
2
with the StanD BaSE of the TV.
M5 x 14
3
Assemble the TV as shown.
Fix the 4 screws securely using the holes
4
in the back of the TV.
M4 x 28
! !
notE
►
When assembling the desk type stand,
make sure the screws are fully tightened (If
? ?
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
10
StanD BoDY
StanD BaSE
(For plasma tV)
DETAChMENT
Carefully place the TV screen side down
1
on a cushioned surface to protect the
screen from damage.
2
Remove the screws that hold the stand on.
3
Detach the stand from TV.
protECtion CoVEr
After removing the stand, install the included
protECtion CoVEr over the hole for the
stand.
Press the protECtion CoVEr into the TV
until you hear it click.
When installing the wall mounting bracket, use
the protECtion CoVEr.
protECtion CoVEr
Fix a guide to the outside.