Installation and connection
en
Turn the condensate container by
7.
180° onto its underside and release
the stopper which is fitted there. Turn
the container back by 180° and
press the stopper into the opening
on the upper side of the condensate
container.
Pull the filter out of the notch and
8.
place it into the recess on the
condensation container.
Push in the condensation container
9.
until it locks into place.
The condensation is now discharged via
the drain hose into the waste-water
system or into a wash basin
If you want to change the
Note:
condensation drain back to the
condensation container, carry out these
steps in reverse order.
30