Chapter 4 Uefi Setup Utility; Introduction; Uefi Menu Bar - ASROCK B85M-HDS R2.0 User Manual

Chapter 4 UEFI SETUP UTILITY

4.1 Introduction

ASRock Interactive UEFI is a blend of system configuration tools, cool sound effects
and stunning visuals. Not only will it make BIOS setup less difficult but also a lot
more amusing. This section explains how to use the UEFI SETUP UTILITY to
configure your system. You may run the UEFI SETUP UTILITY by pressing <F2>
or <Del> right after you power on the computer, otherwise, the Power-On-Self-Test
(POST) will continue with its test routines. If you wish to enter the UEFI SETUP
UTILITY after POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or
by pressing the reset button on the system chassis. You may also restart by turning
the system off and then back on.
Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.

4.1.1 UEFI Menu Bar

The top of the screen has a menu bar with the following selections:
Main
OC Tweaker
Advanced
Tool
H/W Monitor
Boot
Security
Exit
48
For setting system time/date information
For overclocking configurations
For advanced system configurations
Useful tools
Displays current hardware status
For configuring boot settings and boot priority
For security settings
Exit the current screen or the UEFI Setup Utility