3-phase pressure switch for house water systems, pumps, and compressors (5 pages)
Summary of Contents for XPOtool SK-9
Page 1
Operation Manual Pressure Switch for House Water Systems SK-9 50622 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Page 2
To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 50622 Page 2 The Tool Experts 08 2022-1...
Page 3
If your pump has an output of more than 1.1 kW, you should connect a commercially available power protection device or a corresponding power relay. With a 380 V power protection, 380 V/400 V three- phase pumps can also be controlled. https://www.XPOtool.com Item 50622 Page 3...
Page 4
Set the switch-on pressure (1). • Screw in the differential pressure nut (2) up to the switch-off pressure. Dimensions and pieces Switch-on pres- Differential pressure (2) sure (1) Motor Mains Earth https://www.XPOtool.com Item 50622 Page 4 The Tool Experts 08 2022-1...
Page 5
D-52249 Eschweiler Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 50622 Page 5 The Tool Experts 08 2022-1...
Need help?
Do you have a question about the SK-9 and is the answer not in the manual?
Questions and answers