Table of Contents
Advertisement
Quick Links
Model: RP02RH Series
Wireless Miniature Circuit Breaker with Power Meter
Wireless Miniature Circuit
Breaker with Power Meter
RP02RH Series
User Manual
Copyright©Netvox Technology Co., Ltd.
This document contains proprietary technical information which is the property of NETVOX Technology. It shall
be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written
permission of NETVOX Technology. The specifications are subject to change without prior notice.
Advertisement
Table of Contents
Related Manuals for netvox RP02RH Series
Summary of Contents for netvox RP02RH Series
- Page 1 User Manual Copyright©Netvox Technology Co., Ltd. This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written...
-
Page 2: Table Of Contents
Table of Content 1. Introduction ................................3 2. Appearance ................................4 3. Circuit Breaker Specifications ..........................5 4. Main Features ................................7 5. Set up Instruction ..............................7 6. Data Transmission ..............................9 6.1 Default Value of Protection Parameters ......................10 6.2 Example of ReportDataCmd........................... -
Page 3: Introduction
RP02RH3PNL Wireless 3P+N Miniature Circuit Breaker with Power Meter and Leak Detection RP02RH series is a class C smart Miniature Circuit Breaker with Power Meter based on LoRaWAN open protocol. It can monitor the status of all external circuit breakers in real time. (connect up to 9 poles). -
Page 4: Appearance
LoRaWAN: LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and gateways from different manufacturers. 2. Appearance RS-485 Interface Indicator Function Key Antenna LoRa/LoRaWAN Radio Module 485 Signal Line External Circuit Breaker Power Module LoRa/LoRaWAN Radio Module RP02RH1PN... -
Page 5: Circuit Breaker Specifications
3. Circuit Breaker Specifications Breaker UEZ3 (1PN) ●Rated Voltage: AC230V / 50Hz ●Rated Current: 63A ●Breaking Capacity: 6kA ●Mechanical Life: 10000 times ●Electrical Life: 6000 times ●Communication Protocol: RS485, Modbus-RTU ●Alarm Function: Overload, overvoltage, undervoltage, temperature, overpower ●Protective Function: Short circuit protection, overcurrent protection based on current setting, overvoltage protection, undervoltage protection, over temperature protection, overpower protection ●Information Collection: Current, voltage, power, frequency, temperature, lifetime, electricity ●Error Message: 10 messages... - Page 6 Breaker UEZ3L (1PNL) with leakage detection ●Rated Voltage: AC230V / 50Hz ●Rated Current: 63A ●Breaking Capacity: 6kA ●Mechanical Life: 10000 times ●Electrical Life: 6000 times ●Communication Protocol: RS485, Modbus-RTU ●Residual Current Type: AC type ●Residual Current: 30mA ●Alarm Function: Leakage, overload, overvoltage, undervoltage, temperature, overpower ●Protective Function: Leakage protection, short circuit protection, overcurrent protection based on current setting, overvoltage protection, undervoltage protection, over temperature protection, overpower protection ●Information Collection: Leakage, current, voltage, power, frequency, temperature, lifetime, electricity...
-
Page 7: Main Features
4. Main Features ⚫ Compatible with LoRaWAN ⚫ Support RS485 serial port transparent transmission. ⚫ Circuit breaker attribute value collection. ⚫ Multiple circuit breaker protection. ⚫ Simple operation and setting. 5. Set up Instruction On/Restore to factory setting Power on Power supply of power module Turn on Power supply of power module, the green light flashes once: success... - Page 8 Function Key Function: Restore to factory setting Press and hold for 5 seconds The green indicator flashes for 20 times: success The green indicator remains off: fail The device is in the network: green indicator flashes once and sends a format report Press once 87 + ReceiveData (ReceiveData is the latest received data) format report The device is not in the network: green indicator remains off...
-
Page 9: Data Transmission
The data transmission cycle of the device shall be subject to the burning configuration. The interval between two reports must be the maximum time. Refer to Netvox LoRaWAN application command documents and command for data analysis reported by the device. http://cmddoc.netvoxcloud.com/cmddoc... -
Page 10: Default Value Of Protection Parameters
6.1 Default Value of Protection Parameters Protection Method: 0x00 None 0x01 Alarm 0x02 Trip 0x03 Alarm and trip Protection Method Condition Function (Can modify) (Cannot modify) 120%Ir (3PN,3PNL) Action value 125%Ir (1PN,1PNL) Overload Protection 0x02-Trip Alarm value 113% Ir Time coefficient Action value 160V Undervoltage Protection... -
Page 11: Example Of Reportdatacmd
Version– 1 byte –0x01——the Version of NetvoxLoRaWAN Application Command Version DeviceType– 1 byte – Device Type of Device The DeviceType is listed in Netvox LoRaWAN Application DeviceType doc ReportType – 1 byte –the presentation of the NetvoxPayLoadData，according the DeviceType NetvoxPayLoadData– Fixed bytes (Fixed =8bytes) 6.2.1 1PN/1PNL Report Data... - Page 12 byte (03): Breaker Type－3:1PNL byte (01): BreakerProtectStatusBits－Alarm, 0x01=00000001 (bit 0=1) byte (08): AlarmStatusBits－UnderVol (Low voltage alarm) , 0x08 = 00001000 (bit3=1) byte (00): Pre-TripStatusBits－NULL byte (00): TripStatusBits－NULL byte (01): HandOrAutoControlAndSelfTestStaus－Hand byte (00): OnOffStatus－Off #Packet 2: 01C902020000009500001B byte (01): Version byte (C9): DeviceType －RP02RH1PN(L) Series byte (02): ReportType byte (02): Breaker RS485Addr－2 byte (0000):...
-
Page 13: 3Pn/3Pnl Report Data
6.2.2 3PN/3PNL Report Data Report Type=0x11-0x18 Report Device Device NetvoxPayLoadData Type Type AlarmStatusBit Pre-TripStatusBits (2Bytes) (2Bytes) Bit0:APhaseOverLoad Bit0:APhaseOverLoad Bit1:BPhaseOverLoad Bit1:BPhaseOverLoad BreakerType BreakerProtectStatusBit Bit2:CPhaseOverLoad Bit2:CPhaseOverLoad (1Byte) Bit3:NPhaseOverLoad Bit3:NPhaseOverLoad (2Bytes) 1:1P Bit4-5:Reserved Bit4-5:Reserved 2:1PN BreakerRS485Addr Bit0:Alarm Bit6: CreepAge Bit6: CreepAge 0x11 3:1PNL Bit1:Pre-Trip Bit7:APhaseUnderVol Bit7:APhaseUnderVol... - Page 14 Note: Please refer to the above NetvoxPayLoadData description for the specific reported data. If no related alarm is set, all alarm related information bits are set to 0. #Packet 1:01C9110105000103800000 BreakerRS485Addr=1 BreakerType=3PN BreakerProtectStatusBits=Alarm AlarmStatusBits= A/B/C Phase UnderVol Low voltage alarm),0x380= 11 1000 0000(bit7~bit9=1) Pre_TripStatusBits3PN=NULL #Packet 2:01C9120100000000000000 BreakerRS485Addr=1...
-
Page 15: Example Of Configurecmd By Acquisition Mode
APhasePowerFactor=0 BPhasePowerFactor=0 CPhasePowerFactor=0 #Packet 7:01C917010000000C010000 BreakerRS485Addr=1 CPhaseEnergy=12wh HandOrAutoControlStaus=Hand onoff_status=off #Packet 8:01C91801FFFF000003D900 BreakerRS485Addr=1 LeakageCurrent=NA －985, 0x3D9=985 OnOffTotalCount 6.3 Example of ConfigureCmd by Acquisition Mode FPort：0x07 Bytes Var (Fix =9 Bytes) CmdID DeviceType NetvoxPayLoadData CmdID– 1 byte DeviceType– 1 byte – Device Type of Device NetvoxPayLoadData–... -
Page 16: Remote Control Circuit Breaker
For example, if the RP02RH series is externally connected with two 1PN and one 3PN, the configured ReportMaxTime must be greater than (2 * 1PN reportcount + 1 * 3PN reportcount) * MinTime 6.3.2 Remote Control Circuit Breaker... -
Page 17: Mode Switching
6.3.3 Mode Switching Device Description Device NetvoxPayLoadData Type PassThroughModeOn(1Byte) SetPass Reserved 0x03 0x00_Off ThroughModeReq (8Bytes,Fixed 0x00) 0x01_On SetPassThrough Status Reserved 0x83 ModeRsp RP02RH (0x00_success) (8Bytes,Fixed 0x00) 0xC9 GetPassThrough Series Reserved 0x04 ModeReq (9Bytes,Fixed 0x00) PassThroughModeOn(1Byte) GetPassThrough Reserved 0x84 0x00_Off ModeRsp (8Bytes,Fixed 0x00) 0x01_On (1) The configuration mode is acquisition mode... -
Page 18: Application
It is assumed that the protocol format of the external RS485 device is Transmission frame: 010400100002700E Return frame: 01040440C5D2F2235C Configure device SensorRawCmd Downlink: 0501040010000270E Device return: 8500 (configuration successful) 8501 (configuration failed) Report after 5s: 8701040440C5D2F2235C 7. Application Smart Home Current situation of power consumption ⚫... - Page 19 ⚫ Cost reduction: Students’ dormitories realize remote meter reading charges and reduce management costs Intelligent Building Current situation of power consumption ⚫ Complex power environment, high personnel density and poor strain capacity ⚫ Serious waste of electric energy ⚫ Personnel use high-power electrical appliances in violation of regulations, which has great hidden dangers to cause fire ⚫...
- Page 20 electrical fire early reduce the occurrence of electrical fire hazards Information communication Current situation of power consumption ⚫ High requirements of power supply continuity ⚫ Difficult regional maintenance and high fault maintenance cost ⚫ Unclear cause of electrical fault ⚫ Failure to supply power in time Coping strategies ⚫...
-
Page 21: Installation
8. Installation Danger ⚫ There may be danger of electric shock, explosion and electric arc burn. ⚫ When working on this power device, please cut off all power supplies first. ⚫ Violation of these instructions may result in serious personal injury. Note ⚫... - Page 22 1: The 12VDC power module, LoRa/LoRaWAN Radio Module and circuit breaker are arranged in the order shown in the figure above. 2: Clamp the 12VDC power module, LoRa/LoRaWAN Radio Module and circuit breaker back hooks on the guide rail, and then release the clips.
- Page 23 4. The wiring diagram of 12VDC power module, LoRa/LoRaWAN Radio Module, circuit breaker and load are as follows: RP02RH1PN ( Power Module + LoRa/LoRaWAN Radio Module + 1PN Circuit Breaker ) RP02RH1PNL ( Power Module + LoRa/LoRaWAN Radio Module + 1PNL Circuit Breaker )
- Page 24 RP02RH3PN ( Power Module + LoRa/LoRaWAN Radio Module + 3PN Circuit Breaker ) RP02RH3PNL ( Power Module + LoRa/LoRaWAN Radio Module + 3PNL Circuit Breaker )
-
Page 25: Wiring
Ensure that the device is powered on after the above installation is correct, and the status after power on: 1: The power on indicator of LoRa/LoRaWAN Radio Module flashes once, then the indicator remains off, and the indicator does not respond when pressing the key. 2: The power module indicator is always on after the power module is powered on. -
Page 26: Dial Switch
8.3 Dial Switch Status Indicator: Closing indication: The indicator is green. Opening indication: The indicator is red. Status Indicator Fault indication: The indicator is flashing red. Fault to be closed: The indicator is flashing green. Manual state: The indicator is flashing red and green alternately. Dial Switch Dial switch: Operate the manual and automatic state of the control module. -
Page 27: Combination Of Power Modules And Circuit Breakers
8.5 Combination of Power Modules and Circuit Breakers Because the external circuit breaker will be limited by the power module, the currently provided power module (with an output power of 24W) can be externally connected to a circuit breaker with a maximum of 9 poles. If the circuit breaker with more than 9 poles is connected, it needs to be expanded through the power supply, but the LoRa/LoRaWAN Radio Module device can connect up to 32 circuit breakers. - Page 28 The output power of the power module is 24W, and the combined wiring diagram of the number of circuit breakers that can install the load is as follows: 1. A power module+1PN(L)*2+3PN(L)*1 2. A power supply module + 1PN(L)*4...
-
Page 29: Important Maintenance Instruction
3. A power module + 3PN(L)*2 9. Important Maintenance Instruction Kindly pay attention to the following in order to achieve the best maintenance of the product: ⚫ Keep the device dry. Rain, moisture, or any liquid might contain minerals and thus corrode electronic circuits. If the device gets wet, please dry it completely.
Need help?
Do you have a question about the RP02RH Series and is the answer not in the manual?
Questions and answers