Table of Contents
Advertisement
EXT SETTING
3
ë
Press the
Then press the
The LIST disappears and the name is assigned to the
EXT terminal.
To erase a name assigned to the EXT terminal:
Choose a blank space.
3
4
Press the
setting.
The menu disappears.
• You cannot choose an EXT terminal name that is not
on the name list (LIST).
■ ■ ■ ■
'8%%,1*
'8%%,1*
'8%%,1*
'8%%,1*
You can choose a signal source to be output from the EXT-2
terminal.
You can do this with the output signal of the device connected
to another EXT terminal, or the picture and sound from a TV
channel you are currently viewing.
1
ì
Press the
terminal.
2
ë
Press the
EXT terminal or TV.
The arrow in the menu represents a signal flow. The left
side of the arrow shows a signal source output from the
EXT-2 terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected to an EXT
terminal passes through the TV and is output from the
EXT-2 terminal.
TV:
The picture and sound of the TV channel you are
currently viewing are output from the EXT-2 terminal.
55
buttons to choose a name.
3
button.
button to complete the
buttons to choose the EXT-2
buttons to choose another
3
3
Press the
button to complete the
setting.
The menu disappears.
• During dubbing, you cannot turn off the TV. Turning
off the TV also turns off the output from the EXT-2
terminal.
• When you choose an EXT terminal as an output, you
can view a TV programme or a picture from the other
EXT terminal while dubbing the picture from a
device connected to the EXT terminal onto a VCR
connected to the EXT-2 terminal.
• The RGB signals from TV games cannot be
output.Teletext programmes cannot be output.
Advertisement
Table of Contents
