Replacing The Hard Disk Drive - IBM Personal System/2 CL57 SX Hardware Maintenance Reference

2.1.3 Replacing the Hard Disk Drive

A replacement hard disk drive is shipped without any preloaded system
information. Start the system with the customer's backup copy of the
Reference Diskette, select Backup/Restore system programs from the Main
Menu, and run the Restore the system partition to load the system utility
programs, the advanced diagnostics programs, and the system-configuration
data set onto the new hard disk.
Note: If the Reference Diskette has been loaded onto the hard disk drive
but the customer's operating system has not been loaded, the
Diskette and F1 prompts appear on the screen.
For information on system utility programs, see the Diagnostic Information
for Micro Channel Computers pamphlet.
IBM PS/2 Model CL57 SX HMR
Replacing the Hard Disk Drive
_ Copyright IBM Corp. 1991
2.1.3 - 1