Honda NSX 2022 Owner's Manual page 144

uuOperating the Switches Around the Steering WheeluDriving Position Memory System
■
Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
Memory Buttons
142
1. Set the power mode to ON. Adjust the
driver's seat and the door mirrors to the
desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press memory button 1 or
(
seconds of pressing the SET button.
u Once the seat and the outside mirrors
position have been memorized, the
indicator light on the button you pressed
stays on and you will hear the double-
beep.
1. Put the transmission into ( P .
2. Apply the parking brake.
3. Press a memory button ( 1 or
(
u You will hear the beep, and the indicator
light will blink.
The seat and the door mirrors will
automatically move to the memorized
positions. When it has finished moving, you
will hear the beeper twice, and the indicator
light stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat or the outside mirror position
before the double-beep.
•
You set the power mode to any position except
ON.
2 within five
(
1Recalling the Stored Position
The seat and door mirrors will stop moving if you:
•
Press the SET button, or a memory button (
( 2 ).
2 ). •
(
Adjust the seat position or door mirrors.
•
Put the transmission into a position other than
1 ( or
.
( P