Advertisement
Changing Keyboard Response to
Using the MIDI Recorder
Touch Pressure (Touch Response)
You can use the built in MIDI recorder to record your
performance and play it back when you want.
Touch Response alters tone volume in accordance with
keyboard pressure (speed).
■ Recording Capacity
1.
• You can record approximately 5,000 notes in Digital
Hold down the FUNCTION button and press the
Piano memory.
Keyboard Touch key.
• You can select from among three levels, or off. Each
■ Recorded Data
press of the keyboard key causes it to beep the
• Keyboard play
number of times shown below to indicate the current
• Tone used for keyboard play
setting.
• Beat (Track 1 only)
Once (long): Off
• Tempo setting (Track 1 only)
Once (short): 1
• Layer setting (Track 1 only)
Twice: 2
• Duet (Track 1 only)
Three times: 3
• Temperament (Track 1 only)
• Setting a smaller value causes lighter touch to
• Keyboard volume (Track 1 only)
produce more powerful sound.
• Chorus (Track 1 only)
• Selecting off causes notes to be played at a fixed
• Brilliance (Track 1 only)
volume, regardless of the key press velocity.
• Reverb setting (Track 1 only)
• Damper Noise On/Off (Track 1 only)
■ Recording Data Storage
• Starting a new recording deletes any data that was
previously recorded in memory.
• Should power fail during recording, all of the data in the
track you are recording will be deleted.
IMPORTANT!
• CASIO COMPUTER CO., LTD. takes no responsibility
for any damages, lost profits, or claims by third
parties arising from the loss of deleted recorded data
due to malfunction, repair, or for any other reason.
Product Specifications
Model
PX-765BK
Keyboard
88-key piano keyboard, with Touch Response
Maximum Polyphony
128 notes
Tone
19 types
• Layer (excluding bass tones)
Acoustic Simulator
Damper Resonance (Damper Noise on/off), Hammer Response
Effects
Brilliance (–3 to 0 to 3), Reverb (4 types), Chorus (4 types), DSP
Metronome
• Beats: 0 to 9
• Tempo range: 20 to 255
Duet Mode
Adjustable tone range (–2 to 2 octaves)
Concert Play
• Songs: 10
• Song volume: Adjustable
• Part On/Off: L, R (Lesson Mode only)
• 3 Modes: LISTEN, LESSON, PLAY
Music Library
• Songs: 60; 10 download songs
(Up to approximately 90 KB per song, up to approximately 900 KB/10 songs total)*
* Based on 1 KB = 1024 bytes
• Song volume: Adjustable
• Part On/Off: L, R
Recorder
MIDI Recorder
• Modes: Real-time recording, playback
• Songs: 1
• Tracks: 2
• Capacity: Approximately 5,000 notes total
• Recording storage: Built-in flash memory
Pedals
Damper (half-pedal supported), sostenuto, soft
Other Functions
• Touch Response: 3 levels, Off
• Transpose: 2 octaves (–12 to 0 to +12)
• Tuning: 415.5 Hz to 440.0 Hz to 465.9 Hz (0.1 Hz steps)
• Temperament: Equal + 16 other types
• Octave Shift: 4 octaves (–2 to 0 to +2)
• Panel Lock
MIDI
16-channel multi-timbre receive
USB Memory
–
Input/Output Terminals
• PHONES/OUTPUT jacks: Stereo standard jacks × 2
• AC Adaptor Terminal: 12 VDC
• USB port: Type B
• Pedal connector
Speakers
φ12 cm × 2 (Output: 8W + 8W)
Power Requirements
AC adaptor: AD-A12150LW
• Auto Power Off: Approximately 4 hours; Can be disabled.
Power Consumption
12V = 18W
Dimensions
Piano and Stand: 139.1(W) × 29.9(D) × 79.8(H) cm (54 13/16 × 11 3/4 × 31 7/16 inches)
Weight
Piano and Stand: Approximately 31.5 kg (69.4 lbs)
• Specifications and designs are subject to change without notice.
■ Tracks
■ To play back a recorded performance
A "track" is a location where your performance is recorded.
1.
Press the MIDI REC button once or twice (Until the
This Digital Piano has two tracks, and the status of each is
MIDI REC lamp is lit.)
indicated by the L/R lamps of the a button.
This enters playback standby.
2.
Hold down the FUNCTION button and press the
a button once or twice until the lamp of the track
Track 1
Track 2
to be played back is lit.
• To play back both tracks, make sure that both the L
and R lamps are lit.
Lamp
Status
3.
Press the a button.
Unlit
Off
This starts playback.
Lit
Playback standby or playback in
• To stop playback, press the a button.
progress
■ To play back from one track as you record to
Flashing
Recording standby or recording in
another track
progress
1.
Press the MIDI REC button once or twice (Until the
MIDI REC lamp is lit.)
NOTE
• You can record each track separately and then combine
This enters playback standby.
them so they play back together as a single song.
2.
Hold down the FUNCTION button and press the
a button once or twice until the lamp of the track
While playing
to be played back is lit.
Track 1
Record
back...
3.
Press the MIDI REC button so the MIDI REC lamp is
Song name
flashing.
Track 2
Record
This enters record standby.
4.
Hold down the FUNCTION button and press the
■ To record keyboard play
a button once or twice until the lamp of the track
1.
to be recorded is flashing.
Press the MIDI REC button once or twice so the
5.
MIDI REC lamp is flashing.
Press the a button or start playing.
This enters record standby.
This starts recording and playback.
2.
• If you want to re-record from the beginning, hold
Hold down the FUNCTION button and press the
down the MIDI REC button until the Digital Piano
a button once or twice until the lamp of the track
beeps.
to be recorded is flashing.
• To stop playback and recording, press the a
3.
To start recording, press the a button or start
button.
playing.
Recording can also be started by pressing a pedal or
performing another operation.
• If, while recording is in progress, you want to re-
record from the beginning, hold down the MIDI
REC button until the Digital Piano beeps. This
discards the current recording data and enters
recording standby.
• To stop recording, press the a button or MIDI
REC button.
Linking with an Application (APP Function)
Your Digital Piano can connect with a smartphone, tablet, or other smart device. A special app is available to display music
scores and a piano roll display to support your practice.
Downloading the Special App
Go to the website below to download the app and install it on your smart device.
https://support.casio.com/global/en/emi/manual/PX-765/
Included Accessories
Separately Available Accessories
● AC adaptor
• You can get information about accessories that are
● Power cord
separately for this product from the CASIO catalog
● Music Stand
available from your retailer, and from the CASIO
● Leaflets
website at the URL below.
• Safety Precautions
• Other (Warranty, etc.)
https://support.casio.com/global/en/emi/manual/PX-765/
Items included as accessories are subject to change
without notice.
■ To delete a recorded performance
Applying Reverb
1.
IMPORTANT!
Each press of the REVERB button toggles reverb
• A track delete operation cannot be undone. Deleted
between on and off.
data is unrecoverable.
Reverb is applied when it is turned on.
1.
Press the MIDI REC button once or twice so the
■ To select the reverb type
MIDI REC lamp is flashing.
1.
While holding down the FUNCTION button, press
2.
Hold down the FUNCTION button and press the
the keyboard key of the reverb type to be applied.
a button once or twice until the lamp of the track
1: Room
to be deleted is flashing.
2: Small hall
3.
Hold down MIDI REC until the MIDI REC lamp is lit.
3: Large hall
This enters delete standby.
4: Stadium
4.
Hold down the FUNCTION button and press the
a button.
This deletes the contents of the selected track.
• To exit the above operation at any point, press the
MIDI REC button once or twice so the MIDI REC
lamp is unlit.
USER'S GUIDE
Troubleshooting
If this happens:
Do this:
No sound is produced when I
1. Rotate the VOLUME knob more towards "MAX".
press a keyboard key.
2. Disconnect whatever is connected to the PHONES/OUTPUT jack.
3. Turn on the Local Control setting. For details, refer to the "User's Guide (Full)".
The pitch of the Digital Piano
1. Change the transpose setting to "0". Or turn power off and then back on.
is off.
2. Change the tuning setting to 440.0 Hz. Or turn power off and then back on.
3. Change the octave shift setting to "0". For details, refer to the "User's Guide (Full)".
4. Change the temperament setting to "00: Equal".
Nothing happens when I press
Check the orientation of the pedal unit plug and makes sure it is inserted as far as it goes.
a pedal.
For the correct plug orientation, see "To connect the cables" under "Assembling the
Stand" of page 4/4 of these instructions.
Tones and/or effects sound
Turn off Auto Resume, and then turn power off and then back on again. For details, refer
strange. Turning power off and
to the "User's Guide (Full)".
then back on again does not
eliminate the problem.
Example: No change in
intensity when key press
pressure (touch) is changed
A tone's quality and volume
This is an unavoidable result of the digital sampling process,* and does not indicate
sounds slightly different
malfunction.
depending where it is played
* Multiple digital samples are taken for the low range, middle range, and high range of
on the keyboard.
the original musical instrument. There may be a very slight difference in tonal quality
and volume between sample ranges.
When I press a button, the
This happens while multiple parts are sounding at the same time while using layer, using
note that is sounding cuts out
the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when one of
momentarily or there is a
these conditions exists causes the effect setting that is built into the tone to change
slight change in how effects
automatically, which causes notes to cut out momentarily or a slight change in how
are applied.
effects are applied. It does not indicate malfunction
I need to reset all Digital Piano
Hold down the FUNCTION, MIDI REC and E.PIANO1 buttons, and press the power
data and settings to their
button to turn on power.
initial defaults.
I need to reset a specific
Hold down the FUNCTION button and press the + and – keyboard keys of the setting at
setting to its initial default.
the same time.
Continued on sheet 3/4
2/4
Advertisement
