Advertisement
Quick Links
WH-25/WH-50 Impedance Matching Stereo Volume Controller
D
escription
WH25/ WH50 is a wall mounted impedance matching stereo volume control, which connects between the speaker
level output of an amplifier, receiver or speaker selector and a pair of speakers.The volume control is designed to
run multiple pairs of speakers without damaging your amplifier or receiver. The adjustment is made by using
bridge clips that can be easily replaced.
S
pecification
Technical data
Rated power
Component set
Install depth
Dimension (W*H*D)
F
eatures
Rated power: 25W/50W
Minimum impedance capability of amplifier:
Appropriate bridge clip setting (1x, 2x or 4x)
Rotary switch with stopper, 5 volume levels,
1 off position
Rectangle, elegant and compact design
Can run multiple pairs of speakers
WH-25
25W
Rotary switch with stopper, 5 volume levels, 1 off position
47mm
70*120*80mm
4-8Ω
WH-50
50W
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DSPPA WH-25
Summary of Contents for DSPPA WH-25
- Page 1 WH-25/WH-50 Impedance Matching Stereo Volume Controller eatures Rated power: 25W/50W 4-8Ω Minimum impedance capability of amplifier: Appropriate bridge clip setting (1x, 2x or 4x) Rotary switch with stopper, 5 volume levels, 1 off position Rectangle, elegant and compact design ...
- Page 2 Volume control wiring: CAUTION: Please make sure your amplifier or receiver is turned off before wiring. This volume control can be used with up to 14-gauge wire. Measure the distance from the speaker to the amplifier. For distance of 50 feet or less, use 18-gauge speaker wire no more than 1/4”...
Need help?
Do you have a question about the WH-25 and is the answer not in the manual?
Questions and answers