Download Print this page
Teka ELOBAU 462 121.E1.1 Operating Manual
Teka ELOBAU 462 121.E1.1 Operating Manual

Teka ELOBAU 462 121.E1.1 Operating Manual

Safety evaluation unit

Advertisement

Quick Links

Operating Manual
TEKA Maschinenbau GmbH
In den Seewiesen 2
D-67480 Edenkoben
Telefon: +49 (0) 6323 809 0
Telefax: +49 (0) 6323 809 10
E-Mail:
info@teka-maschinenbau.de
Homepage:
http://www.teka.de
Safety Evaluation Unit
ELOBAU 462 121.E1.1
7.10 – 00038_en
04/2017
710_00038_EN_2017-04.docx

Advertisement

loading
Need help?

Need help?

Do you have a question about the ELOBAU 462 121.E1.1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Teka ELOBAU 462 121.E1.1

  • Page 1 Operating Manual Safety Evaluation Unit ELOBAU 462 121.E1.1 TEKA Maschinenbau GmbH In den Seewiesen 2 D-67480 Edenkoben Telefon: +49 (0) 6323 809 0 Telefax: +49 (0) 6323 809 10 7.10 – 00038_en E-Mail: info@teka-maschinenbau.de Homepage: http://www.teka.de 04/2017 710_00038_EN_2017-04.docx...
  • Page 2 710_00038_EN_2017-04.docx...
  • Page 3 710_00038_EN_2017-04.docx...
  • Page 4 710_00038_EN_2017-04.docx...
  • Page 5 710_00038_EN_2017-04.docx...
  • Page 6 710_00038_EN_2017-04.docx...
  • Page 7 Translation of the original Operating instructions Appropriate Variants of the basic types are described. In addition, for customer-specific types, the datasheets can be requested from elobau. Field of application Operate the machine safety sensors only in accordance with their intended use. Failure to comply with these conditions will invalidate any warranty claims or any liability on the part of the manufacturer.
  • Page 8: Installation

    Installation Make sure that the marks on the machine safety sensor and the actuation magnet are aligned with each other. Any installation position may be used. Do not mount the sensor and actuation magnet in ferritic material. If necessary, use non-ferritic material in an area of 20 mm around the sensor.
  • Page 9 710_00038_EN_2017-04.docx...
  • Page 10 710_00038_EN_2017-04.docx...