Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Solaire AGBQ-30CIR
Summary of Contents for Solaire AGBQ-30CIR
- Page 1 Care & Use of Your Solaire 30, 42, 56” Grill...
- Page 2 We at Rasmussen Iron Works, Inc., would like to offer our sincere thanks for purchasing a Solaire Infrared Grill. We believe that you are now in possession of one of the finest outdoor cooking appliances ever produced. By carefully following the instructions outlined in this Care &...
-
Page 3: Table Of Contents
Operating the Grill ........ -
Page 4: Safety Precautions
OUTDOOR USE ONLY Your SOLAIRE INFRARED Grill is designed for outdoor use only and must not be installed in or on recreational vehicles and / or boats. Page 2 Grease is flammable. Let hot grease cool before attempting to handle it. -
Page 5: Locating The Grill
4.Make the connection to the gas regulator at the rear of the Grill with a flexible connector. Ensure that the connection is tight. Your SOLAIRE INFRARED Grill can now be located into the enclosure. Pass the flexible gas connector through the access hole located in the support base of the enclosure for final connection to the gas supply. -
Page 6: L.p. Gas Hook-Up
FOR ACCESS TO GAS CONNECTION 1/2" x 3/8" FLARE FITTING CONNECTION: (Figure 2) Your SOLAIRE INFRARED Grill for use with L.P. gas comes equipped with its own regulator, which MUST NOT be removed. There is also a secondary high capacity, hose/regulator assembly for connection to a standard 20 lb. -
Page 7: Natural Gas Hookup
Grill is fitted with a shut off valve conveniently positioned to the grill and giving ease of access. Your SOLAIRE INFRARED Grill for use with Natural Gas comes equipped with it own regulator which MUST NOT be removed. If this regulator... -
Page 8: Leak Testing
ALWAYS CHECK FOR LEAKS AFTER EVERY L.P. TANK CHANGE GENERAL Although all gas connections on your SOLAIRE INFRARED Grill are leak tested at the factory prior to ship- ment, a complete gas tightness check must be performed at the installation... -
Page 9: Tips On Infrared Grilling
Steak, 1” thick Swordfish, 1” thick (when cooking fish, spray both sides of fillet with non-stick cooking spray PRIOR to placing on grill) Corn on the Cob, rinsed, in husk HI: 8 min., LO 12 min. (Qtr. turn every 2 mins.) REAR ROTISSERIE (AGBQ Models only). -
Page 10: Operating The Grill
USING THE GRILL: Grilling requires high heat for sear- ing and proper browning. The intense infrared heat produced by your SOLAIRE Grill meets these requirements perfectly. Meat is cooked evenly throughout, while grease and food particles are vaporized upon contact with the burner, giving added flavor to your food. -
Page 11: Lighting Instructions
“on”. If there is evidence of cuts, wear, or abrasion, it must be replaced prior to use. Do not use the Grill if the odor of gas is pre- sent. The pressure regulator and hose assembly supplied with the unit must be used. -
Page 12: Using The Rotisserie (Agbq Models Only)
USING THE ROTISSERIE: Begin by attaching the motor to the grill by sliding it onto the mounting plate attached to the side of the grill. The bracket can be mounted to either side according to your needs. Next, assemble the spit rod. First slide the counter-weight onto the rod, fol- lowed by the bearing. -
Page 13: Optional Accessories
ROTISSERIE INSTALLATION: If you purchased the optional rotisserie for your Solaire Grill, it is necessary to mount the bracket and motor to the grill by following these instructions: 1. Attach bracket to either side of grill as shown in Fig. 7 using bolts and nuts provided in the rotisserie kit. - Page 14 This optional accessory brings a new level of versatility to outdoor cooking, allowing you to deep fry, steam or boil foods on one side of your Solaire while grilling on the other. To ensure safe operation and quality results, follow...
- Page 15 3. Light grill and preheat according to the instructions on page 9. Solaire recommends that the griddle not be used on heat settings above “ ”, unless extreme high heat is desired (such as for blackening foods).
-
Page 16: Care And Maintenance
Light all of the burners and check for proper flame characteristics. To maintain the appearance of your SOLAIRE INFRARED Grill for many years, keep it covered when not in use. Backyard environments are harsh on your grills’ finish. Long exposure to... -
Page 17: Care Of Stainless Steel
DAY TO DAY CARE To maintain the original appearance of your SOLAIRE INFRARED Grill, a regu- lar cleaning routine should be carried out using the following guidelines: 1. After use, following the safety pre-... -
Page 18: Troubleshooting
Troubleshooting SPIDER AND INSECT WARNING Spiders and insects can nest in the burners of this or any other grill, and cause the gas to flow from the front of the burner. This is a very dangerous condition, which can cause a fire to... -
Page 19: Warranty Information
DURATION OF WARRANTY Rasmussen Iron Works, Inc. warrants all grill components to the original purchaser to be free of factory defects in material and workmanship for a period of one (1) year from the original date of purchase. This does not apply if the unit was subject to other than normal household use. -
Page 20: Gas Conversion Instructions
AGBQ-30 Rotis AGBQ-42 & 56 Rotis TO CONVERT YOUR SOLAIRE INFRARED GRILL FROM L.P. GAS TO NATURAL GAS, FOLLOW THESE STEPS: 1. Remove the rear top panel from the Grill; this will give access to the regulator (see drawing below). - Page 21 6. Replace the LP Main orifice with a 1.75 Natural Gas Orifice. 7. Repeat the procedure above for the second side burner. 8. NOTE: If you are only converting a Double Side Burner, convert the Regulator as described in 2-4 under Grill Conversion detailed on page 18.
-
Page 22: Parts List Description (Agbq Models)
Parts List (AGBQ Models) ITEM No. PART No. DESCRIPTION 4429R Rear Hood 30” 4830R Rear Hood 42” 4425R Front Hood 30” 4826R Front Hood 42” 6001R Stander Bracket & phenolic base 6002R 30” hood handle (12” embossing) 1.3mm 6018R 42” hood handle (12” embossing) 1.3mm 4441R Cover Plate B 6039R... -
Page 23: Parts List Drawing
�� HOW TO OBTAIN SERVICE For warranty, service, contact your local Solaire Infrared Grilling Systems authorized service agency. Provide him with the Model #, Serial #, gas type and date of installation, and a brief description of the problem. If you need assistance in locating the authorized service agency in your area, contact your local dealer. -
Page 24: Parts List Description (Irbq Models)
8013R Front Control Panel For warranty, service, contact your local Solaire Infrared Grilling Systems authorized service agency. Provide him with the Model #, Serial #, gas type and date of installation, and a brief description of the problem. If you need assistance in locating the authorized service agency in your area, contact your local dealer. -
Page 25: Parts List Drawing
Parts List Drawing (IRBQ Models) Page 23... -
Page 26: Built-In Cutout Details
IF YOUR ENCLOSURE IS COMBUSTIBLE, THEN Insulated Jacket Cutout THE INSTALLATION OF Dimension C AN INSULATED JACKET Model IRIJ-30 MANUFACTURED BY Model IRIJ-42 SOLAIRE INFRARED Model IRIJ-56 GRILLS IS REQUIRED. Page 24 34 1/4” 46 1/4” 60 1/4” GRILL CUTOUT Dimension A 30”... -
Page 27: Grill Accessories
Solaire Bartending Centers Nothing completes a perfect outdoor meal better than a nice, cold drink. Prepare them in style with a Solaire Bartending Center. Have all the features that professional bartenders demand right at your fingertips with one of these all 304 series stainless steel units designed to integrate perfectly with your Solaire grill. - Page 28 AGBQ Conventional Burner Kit - #SOL-CZAC Also from Rasmussen Solaire grills are brought to you by Rasmussen Iron Works, Inc., a family business producing quality products since 1907. A leader in the gas log industry for over 45 years, Rasmussen has a wide variety of log styles and sizes in both vented and vent-free designs.
Need help?
Do you have a question about the AGBQ-30CIR and is the answer not in the manual?
Questions and answers