Table of Contents
Advertisement
input the letters, the letters or numbers will display on the cursor of the input column Press [* key] to switch over the input
methods,
select "abc", "Abc" or "ABC".
- Number input: press [LSK] to switch over the input methods, select "123", input the numbers by [number key] on the
keyboard.
- Symbol input: in the text input screen, press [# key] to enter into the symbol input mode, select more symbols by [upper
navigation
key] or [down navigation key], input the symbols by corresponding [number key] or [OK].
4. Reference Information
_
_
5.Repair Guideline
You are welcome to use the MP produced by NEC. In case of any problem of N600i MP in use, please contact the distributor
or NEC repair center. In
case of repair, please send your MP to local repair station (see the Warranty Certificate attached with MP); in case of no
repair station locally, please
send your MP and duplicate invoice to the distributor for EMS.
To inquire about the latest repair outlet and replacement center address, please contact 800-820-7007, or
http://www.necmobile.com
5. Repair Guideline
Common problems Potential causes Solution
1. Weak signals Far away from base station or strong
insulation
Get near the windows or corridors.
2. The screen will display "no card" or
"invalid card"
Possibly dirty contact pad of USIM card Gently clean the contact pad of USIM
card.
3. Backlight constantly light Possibly configured power-on backlight Re-configure backlight mode
4. Battery charged full holds short Possibly configured power-on backlight,
to consume high electricity
Re-configure backlight mode
5. Silent headphone Possibly configured minimum volume Adjust the volume by up/down volume
key
6. Only vibration no ring upon incoming
call
Possibly configure the MP as
Conference Mode
Re-configure "standard mode"
7. No billing function (AoC) No such service of domestic network at
present
Contact network service provider
8. Fail to access WAP network Possibly wrong WAP setting Reset WAP Connection setting in
Phone settings, or contact network
service provider
Advertisement
Table of Contents
