Table of Contents
Advertisement
Using the On-Screen Display(OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Power Delivery : 75W
To use the controls:
1. Press
to open the main OSD menu.
2. Use
or
function. If there is a sub-menu, you can move between options using
press
to select that function. Use
3. Press
4. Press and hold
adjustments to the OSD. Press and hold
adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold
disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.
Qreator 27
Brightness
Contrast
DCR
Scaling
Over Drive
FreeSync
HDR
Energy Saving Mode ：On
to move among the icons. Select an icon and press
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
USB-C
3840x2160@60Hz
or
to make adjustments then press
for 10 seconds to unlock the OSD and allow
Chapter 2.Adjusting and using your monitor 2-4
to access that
or
, then
to save.
for 10 seconds to
Advertisement
Table of Contents
