Setting Up Guest Mode; Using Guest Mode; Hardware Key Control Mode - LG Sprint LS995 User Manual

Note: Guests can also use applications that your selected applications link to.

Setting Up Guest Mode

Allow you to set up the Guest mode to use this feature.
1. Tap >
2. Tap Use Guest mode.

If your Lock screen is already set to Pattern (or Face unlock with a backup pattern),
go to step 3.

If your Lock screen is not set to Pattern, tap OK, then tap Pattern and enter your
normal lock screen pattern as necessary.
Note: If your unlock sequence is set to a PIN or password, you will need to enter it to be able
set the unlock pattern.
3. Tap Set pattern, then set the pattern you want to use to put your device in Guest mode.
4. Tap Set apps to view which apps can be accessed in Guest mode. Tap the Add icon
in the upper right corner of the screen to change the Guest apps list.

Checkmark the apps that can be accessed.

Remove checkmarks from the apps that you don't want to be accessed.

Tap OK when all of the checkboxes are set as you want.

Using Guest Mode

After you've set up and enabled Guest mode, lock the screen so that you can enter your Guest
mode pattern. The Guest mode Home screen is displayed with only the apps you've selected for
guest access. To exit Guest mode, enter your normal unlock pattern on the Lock screen.
Note: The Use Guest mode checkmark is automatically removed from the checkbox if your
lock sequence is changed from Pattern. Otherwise, manually disable it if you no longer
want to allow guest access.

Hardware Key Control Mode

If your phone display is damaged or broken, you can answer an incoming call, end a call, or turn
off an alarm using the hardware keys.
1. Turn your phone off.
2. Press and hold the Power/Lock Key
time for more than 6 seconds to enter the Hardware key control mode.
Phone Basics
> System settings > Guest mode.
and the Volume Keys
13
at the same