Do you have a question about the Slinglink and is the answer not in the manual?
Questions and answers
Dick
April 21, 2025
I have aSlingLink Turbo W1, model SL30-100, and have no idea what to do with it. Can you help me?
1 comments:
Mr. Anderson
May 11, 2025
You can use the SlingLink TURBO W1 (model SL30-100) to connect your Slingbox to your home network using your home's electrical wiring. Connect the one-port SlingLink TURBO to your router with an Ethernet cable and plug it directly into a wall outlet. Then connect the four-port SlingLink TURBO to your Slingbox using another Ethernet cable and plug it into another wall outlet. This setup allows network communication through power lines. Avoid using power strips or surge protectors, as they can interfere with data transfer.
Page 2
Slingbox and router right out of the box. No additional software is required. If you have purchased SlingLink TURBO along with your new Slingbox, connect your television source or other audio/video source to the Slingbox before connecting with SlingLink TURBO. Refer to the Slingbox Quick Start Guide for instructions.
Page 3
You can connet up to three more devices to the four port SlingLink TURBO. TIP: Plug SlingLink TURBO directly into an electrical outlet. Do not plug the adapters into a UPS, power strip or other similar device with surge protection. The adapters have their own power filter for protection against surges.
Page 4
STEP 2: ONE PORT SLINGLINK TURBO TO ROUTER Connect the supplied Ethernet cable to an available Ethernet port on your router and to the Ethernet connector on the one port SlingLink TURBO adapter. Plug the SlingLink TURBO into a nearby electrical outlet. One Port SlingLink TURBO Router...
Page 5
Slingbox will blink a few times and then remain lit. TIP: You can use up to 16 SlingLink adapters in your home. Be sure to put a SlingLink TURBO at your router so faster devices communicate at their top speed.
Power light is on. Make sure with an Ethernet cable. TIP: It is not recommended to plug SlingLink TURBO into a power strip which may filter or disrupt network data transfer. NEED MORE HELP? Go to http://www.slingmedia.com/support.
Page 7
Changes or modifications not expressly approved by Sling Media, Inc., could void the user’s authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the Slinglink and is the answer not in the manual?
Questions and answers
I have aSlingLink Turbo W1, model SL30-100, and have no idea what to do with it. Can you help me?
You can use the SlingLink TURBO W1 (model SL30-100) to connect your Slingbox to your home network using your home's electrical wiring. Connect the one-port SlingLink TURBO to your router with an Ethernet cable and plug it directly into a wall outlet. Then connect the four-port SlingLink TURBO to your Slingbox using another Ethernet cable and plug it into another wall outlet. This setup allows network communication through power lines. Avoid using power strips or surge protectors, as they can interfere with data transfer.
This answer is automatically generated