Summary of Contents for Amped AMP-2400
- Page 1 ™ AMP-2400 Power Amplifier User Guide AMPED America © 2021 AMPED America (All specifications subject to change without notice)
- Page 2 WARNING “TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.” CAUTION “TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONAL.” CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN...
-
Page 3: Safety Instructions
• Warranty Card – The serial number is written on the rear panel of the appliance. Copy the serial number onto the warranty card and mail it to: AMPED America 216 Route 206 Suite 15 Hillsborough, NJ 08844 Alternatively, you can register the warranty online at the AMPED America website. - Page 4 • Retain a copy of the original invoice/receipt/bill of sale for the appliance, you will need it if warranty service is ever required. Power Warning – Before turning on the power for the first time, read the following section carefully: •...
-
Page 5: Warranty
(5) years from the date of purchase. What’s Covered In the event of a product failure due to product defect AMPED America will provide all parts and labor required to return the product to its original functional specifications and the cost of return shipping and insurance. - Page 6 The AMPED 2400 power amplifiers utilize independent Class D high performance amplifier modules with integrated power supply for each channel. The resulting sound provides an astonishingly warm and comfortable listening experience much like that of high-end tube amplifiers. Your AMPED 2400 will provide many years of listening pleasure.
-
Page 7: Front Panel Operation
To manually control the AMP-2400 power from the front panel, set the rear panel main power switch to ON and the rear panel Trigger Switch to OFF. Then you will be able to turn the AMP-2400 ON/OFF with the front panel power switch as needed. -
Page 8: Rear Panel Connections & Operation
Rear Panel Connections & Operation Balanced Inputs Trigger Right Speaker Left Speaker Unbalanced Inputs Input Select Switch Main Power Switch IMPORTANT - When making or changing connections on the power amplifier the AC power to ALL EQUIPMENT in your system should be turned OFF. BALANCED Inputs –... -
Page 9: Specifications
Specifications The AMPED 2400 is a two channel amplifier and the specifications below are per-channel. Power Rating @ 1% THD+N @ 1kHz (AES17 filter): 400 WPC @ 8 ohms 800 WPC @ 4 ohms Inter-modulation distortion (CCIF): SE, 18kHz and 19kHz, P0 = 10W, RL = 8 Ohms…………….…… 0.0008% Transient IM Distortion (TIM): SE, P0=10W, @ 8 Ohms…………………………………..………………………..0.002%...
Need help?
Do you have a question about the AMP-2400 and is the answer not in the manual?
Questions and answers